Homag SAWTEQ B-130 HPP130/32/32

Furnishing:
+ Central angle pressing device
+ Manual adjustment of the scoring saw
+ Saw carriage feed: 1 - 60 m/min
+ Main saw motor 7.5 kW
+ CADmatic control with 3-D process graphics
+ Control center with 21-inch full HD multi-touch display in widescreen format
+ Uniform powerTouch user interface
+ Optimization program "CAD-PLAN 4" on the machine
+ Stress relief program
+ Painting of the machine and protective fence posts in RAL 9003 signal white
+ Design strips, safety fence panels, safety doors and stele in RAL 7021 black-grey

Technical specifications:
Cutting length 3200 mm
Cutting width (program slide travel) 3100 mm
Saw blade projection 65 mm
Saw carriage feed: forward 1-60 m/min
reverse constant 60 m/min
Program Slider Speed:
forward 25 m/min
reverse 60 m/min
angle pressing device
min. pressing width 0 mm
max. pressing width complete cutting length
Main saw motor 7.5 kW
Main saw blade 300 x 4.4 x 60 mm
Scorer saw blade 150 x 4.45 - 5.25 x 45 mm
(Note: saw blades are not included)
Roller track (10-track element) 1 piece
Roller track (2-track element) 4 pieces
Collets, single finger 5 pieces
Division 50/250/450/1200/2700 mm
measured from the angle ruler to the middle of the collet
1 x air cushion table 1800 x 650 mm
2 x air cushion tables 1800 x 500 mm
One roller element each on the air cushion tables
Central fan 1 piece
Nozzle division of the air cushion tables 54 x 50 mm
Operating voltage 400 V (+10%/-5%) / 50 Hz
Working height 920 mm
Required air pressure 6 bar
Compressed air requirement 150 NL/min
V at the extraction nozzle approx. 26 m/s
Negative pressure min. 1200 Pa max 2000 Pa
Exhaust air volume 2600 m³/h
Extraction connection chip channel 1 piece 160 mm
Suction connection pressure bar 1 piece 100 mm
Operating temperature min. + 5 degrees
Operating temperature max. + 35 degrees
Condition of the hall floor:
Concrete quality C25/35
Concrete thickness min. 200 mm
without cover layers, all machine feet are cast under by the customer with non-shrink casting compound after assembly has been completed