Husky HYLECTRIC H600 600t

HUSKY HYLECTRIC H600 RS80 / 70 (year 2011) Injection molding machine

In working condition. 97.488 working hours.
Closing force: 6000 kN
Space between columns: 1020 x 1020 mm.
Size of plates: 1440 x 1480 mm.
Stroke of the closing unit: 850/1450 mm.
Mold height (min./max.): 330/930 mm.
Mold height with support for stacked molds (min / max): 380/930 mm.
Maximum separation between plates: 1780 mm.
Expeller stroke: 200 mm.
Ejector force: 112 kN
Diameter of the columns: 168 mm.
Maximum weight of the mold: 10,400 kg.
Empty cycle: 3.2 s.
Cycle time E6: 2.3 s.
RS injection model
Work capacity: 2733
Screw diameter: 70 mm.
L / D screw: 25.0
Injection pressure: 2030 bar.
Injection stroke: 350 mm.
Injection capacity: 1347 cm3
Heating power of the screw sleeve: 42.0 kW
Control areas of the screw sleeve: 5
Pump-based standard injection flow: 500 cm3 / s
Accumulator-assisted injection flow rate: 1819 cm3 / s
Assisted accumulator air injection rate: 3500 cm3
High-speed accumulator assisted injection flow: 4408 cm3 / s
High-speed accumulator-assisted air injection rate: 7000 cm3 / s
Car strength: 120 kN
Diameter of the molten material channel: 22 mm

Standard screw drive
Screw speed: 273 RPM.
Screw peripheral speed: 1.00 m / s
Screw torque: 1660 Nm.
High torque screw drive
Screw speed: 177 RPM.
Screw peripheral speed: 0.65 m / s
Screw torque: 2605 Nm.
High power screw drive
Screw speed: 218 RPM.
Screw peripheral speed: 0.80 m / s
Screw torque: 2605 Nm.
High speed screw drive
Screw speed: 368.3 RPM.
Screw peripheral speed: 1.35 m / s
Screw torque: 1680 Nm.
Oil volume: 1280 l.

Dimensions (W x H) 2.382 x 2.522 mm.
Total length (L): 10,179 mm.
Weight: 32.400 kg.