IDM Activa HD

VOLTAGE: 400V / 50HZ with Neutral EU
LENGTH TOTAL 11.727 MM
Suitable for straight or profiled edges (softforming)

FRONT SIDE HEADS (4 MOTORS FOR SOFT)
PREMILLATE HEADS IN FRONT OF LAW (NO TOOL CHANGE)
total length of the machine mm 11240

ROLLING MATERIAL FOR DIRECT WORKING
THICKNESS OF MELAMINE MM 0.3 / 0.5
PVCABS 0.4-3 MM
ROLLING MATERIAL FOR SOFTFORMING AND REBATES DOOR
MELAMINE EDGES MM 0.3 / 0.5

PANEL FORMAT (MM):
WIDTH MIN./MAX.: 120/2200
MIN./MAX. THICKNESS: 10/60

Single-sided edgebander, left-hand side, designed for the edging of straight and soft panels, longitudinally and widthwise, with spiral materials.
All work units mounted on horizontally adjustable benches allow simultaneous adjustment of several units simultaneously.
Manual panel feeding.
70 mm POWER CHAIN with rubber coated shoes and self-lubricated nylon bottom bearings with round / flat guides.
Feeding chain with automatic lubrication.
Upper pressure bar with single screw transmission.
Automatic adjustment of the height of the upper pressure beam
Standard painting: gray RAL 9002
Standard power supply: 400 VEU 50 Hz (with neutral)
Electrical compliance according to CEI EN 60204-1 standards
Control panel located at the machine power supply.

Machine complete with:
-Auto checkup for emergency devices, track power supply
 power circuit, safety devices and spindles.
- Main emergency drain valve
- Track drive motor power supply circuit
  Electric limit switches with locked contacts.
- Remote control panel with auto / Adjustement mode
- Turn on the flashing lights when the doors of the cab are opened
  and with the engines on).
- Acoustic signal indicating the beginning of the supply track.