Ima Advantage 60

Technical data “workpiece”:
Workpiece length min. 150 mm
Workpiece thickness min. 65*/ 150 mm
*with a maximum workpiece thickness of 25 mm
Workpiece thickness min. 8 mm
12 mm (with profile scraper)
max. 40 mm (with copy function)
60 mm (without copy function)

Smallest workpiece 65x300 / 150x150 x 19 mm
Machining allowance per workpiece edge 0 - 5 mm*
(*note max. cutting cross section)
Workpiece shape rectangular
Material chipboard, MDF
Surface material direct coating :
(melamine resin paper)
Paper
foil
veneer
Laterally protruding coating material 0 mm

Technical data “edge material”
Roll material:
- Paper edges & plastic edges: 0.3 - 3.0 mm
- Veneer edges: 0.5 - 3.0 mm
max. edge cross section 150-180 mm²

Cut edge strips:
- Strips 3.0 - 8.0 mm*
*(with alternating motor on MFA)
max. strip cross section 520 mm²

Edge height
- min. 12 mm
- max. 65 mm
Max. upper edge overhang 2 mm

Edge profiles:
- Paper edge approx. 0.4 mm bevel 15°
- Plastic edge up to 3.0 mm radius depending on the tool
- Mill the strip flush to 8 mm

Technical data “Machine” :
Constant workpiece distance of 35 mm + edge strength from the chain conveyor
max. cross section 520 mm²
Pass width :
min. (with a projection of 35 mm) 65 mm
Min. workpiece length in feed direction 150 mm

Basic height (top edge of the chain track) 900 mm
Aggregate side: Left in feed direction
Pneumatic connection approx. 7 - 8 bar
Control voltage: 24V DC / 230V AC
Only at ambient temperatures of the control cabinet between
The machine can operate at +10 and +35 degrees C electrically/electronicallym work perfectly.

The basic machine consists of:
· Base frame with integrated electrical installation
· Drive for workpiece transport, Feed speed 16 m/min.
· Transport chain with 80 mm width and 60 mm long chain plates
· Upper pressure, equipped with: 2 rows of rubberized rollers, electronic height adjustment
Upper pressure, workpiece thickness over Readable digital display
· Horizontally adjustable by hand, unheated stop ruler
· User-friendly PC control with
- Touchscreen and graphical interface
- Simple, machining-related program creation
- Integrated PLC and electronic route control
- Program memory for up to 1000 programs
· Safety and protective devices CE regulations.
· Sound-absorbing/protective hoods for cross-cut and Milling units
· Support rail for wide workpieces, approx. 700 mm extendable
· Incl. Mounting material

Painting:
- Basic machine with hoods in a gray and white structure
- Aggregates dust gray RAL 7037 structure & smooth
- Safety covers signal red RAL 3001 structure
- Engines black satin matt

· Spray space reserve for release agent
· Space reserve for joint milling machines 2 x 3.0 KW
· Radiator for preheating the workpiece edge
· Gluing unit 283.1513 with oil bath gear with glue 0.8 l 60 mm high with quick-lock system,
Can be used for hot melt adhesive or PU adhesive with single roll/strip magazine, roll diameter. 800mm with main pressure roller and 5 secondary pressure rollers with pre-installation for an extension of the glue information
(Volume 1 liter, 3 x 400 W, including temperature control) for hot melt adhesive, 283.201.
with pre-installation for connecting a separate one

PUR pre-melting unit 283.204., for 310 g cartridges
·Cutting unit 08.415 for cutting the front and rear edge trim,
pneumatically pivotable to 0° or 8°,
with 2 motors 660 W, 400 V, 200 Hz, 12000 rpm,
with 2 HM chop saw blades 160 x 3.5 x 22, Z=36 including static frequency converter with electronic engine brake

· Multiple processing unit 08.346 for chamfer or radius milling of the upper and lower longitudinal edge, as well as for copying the front and back workpieces piece corners.
The horizontal and vertical aggregate movementsm are carried out pneumatically and using mechanical guides
With horizontal positioning on 2 fixed points automatic adjustment between thin and thick edges
(Manually adjustable to one edge thickness at a time thin and thick edges.)
With vertical positioning on 2 fixed points
automatic adjustment between finish milling and
Milling with overhang.
With horizontal and vertical scanning.
With manual motor positioning in X, Y and Z directions with mechanical digital displays.
2 motors 660 W, 400 V, 200 Hz, 12000 rpm, with HSK mount with quick-change device, etc