Ima Novimat/K/I/G80/821/R3

Single sided edge banding machine
Left hand machine

Technical data:
Strip dimensions:
min. strip length at coil material: approx. 220 mm
min. strip height at coil material: approx. 14 mm
max. strip height: approx. 50 mm
max. strip thickness at coil material: approx. 3,0 mm

Workpiece dimensions:
min.workpiece length: approx. 268 mm
workpiece thickness: approx. 10-45 mm
fix workpiece overhang: approx. 38 mm
min. workpiece width at workpiece thickness up to 25mm approx. 70 mm
min. workpiece width at workpiece thickness from 25mm approx. 110 mm

Throughfeed speed: approx. 5-25 m/min
Working height: approx. 950 mm
Unit control: via line control-integrated in the IMATRONIC 121

Anti-stick solvent application top + bottom

Pre-milling:
for edge re-milling calibration of formated workpieces or milling of sideway grooves,
rebating or profiling controllable and not swivable
2 motors 4,5kW 400V 150Hz 9000rpm
2xIR-heater approx.300mm long /1,5kW

Gluing unit with quick lock
4-fold pressure zone up to 3mm,
pneum. pressure, moveable

End trimming unit:
flush or with chamfer
2 motors 200W
horizontal manual swivable 0-25°
side tracing

Milling unit:
max. 3° swivable
with height tracing
2x Motors 1,0kW

Multi processing unit
for fine/profile milling of the upper+lower length, frontal and rear edge
with height tracing and side tracing
2 Motors 660W/400V

Profile scraping unit:
for scraping of the uppper and lower profiles with height tracing and sideway tracing

Flat scraper top+bottom

Buffing unit for cleaning top+bottom
2x Motor 0,25kW

Free place for groove milling unit