Kolbus PE 312 Embossing Press

Machine is intended for blind embossing, film embossing and hot embossing of firm, flexible and plastic cases.
Configuration:
Copilot system with touch screen
case pre-stacking conveyor (positioning with case overlap)
case bending station
case supply with 90 ° pivoting option (format-dependent)
film feeder with two film pulling rollers
unwinder
film withdrawal unit
motorised embossing head adjustment (max. 70 mm)
divided embossing table plate
correction rails for positioning precisely according to the register
temperature-controlled embossing head heater with timer for pre-heating
linear deposit belt with delivery table including overlap width setting
automatic case counter
servo-controlled drive technology based on Siemens technology
counter-stacker delivery to the right with roller conveyor delivery

Special equipment:
1 embossing plate for accommodating the embossing tool (adhesive fastening)
1 embossing plate with grid holes for accommodation (screw connection)
case set-up outside of the machine for reducing the make-ready time
3rd film pulling roller controlled by step motor for the 1st film feeder
2nd film feeder with two film feed rollers controlled by step motors
3rd film pulling roller controlled by step motor for the 2nd film feeder
set-up for embossing time extension
set-up for multiple embossing
cycled feed for ideal utilisation of the film

Technical specifications:
mechanical speed: up to 80 embossings/min
opened case (hardcover) max.: 660 x 405 mm
opened case (hardcover) min.: 155 x 100 mm
opened case (flexible embossing material) max.: 400 x 300 mm
opened case (flexible embossing material) min.: 135 x 100 mm
case pre-stacking conveyor min.: 155 mm
pressure surface max.: 460 x 355 mm
pressing force max.: 350 KN