Landis 30 ANGLE HEAD CYLINDRICAL GRINDER

10 x 24 3R LANDIS 30 ANGLE HEAD CYLINDRICAL GRINDER
Year: 1978

STANDARD CATALOG SPECIFICATIONS
Nominal work swing..................................... 10"
Maximum work swing over table.......................... 10 31/32"
Nominal distances between work centers................. 24"
Maximum work swing and diameter standard machine will grind with full size standard wheel on machine with hydraulic in feed stroke........... . . . . . . . . . . . . . . . 10" 6"-2" H.I.
Minimum diameter wheel to grind zero diameter work on
centers................................................ 20"
Coolant tank capacity.................................. 40 gallons
Hydraulic tank capacity................................ 19 gallons

WORK CARRIAGE
Traverse speed, all lengths thru 72"............... 2 to 240 IPM
Traverse speed, per turn of hand wheel:
(slow)............... 0.100" (fast)................... 0.750"
Work rest capacity..................................... 1/2" to 7"

HEADSTOCK & FOOTSTOCK
Work centers....................................... No. 10 Jarno
Foot stock center movement by................ lever and hand wheel
Head stock work speeds RPM
Dead spindle.................................. 72‑116‑185‑300

WHEELHEAD & WHEELFEED
Grinding wheel, size (standard).................... 8" x 24" x 12"
Grinding wheel, maximum width........................... 8"
Grinding wheel, spindle speeds..................... 800/964 RPM
Grinding wheel, minimum diameter of worn wheel.......... 12"
Basic machine................................. 0.0003" to 0.004"
Machine w/hydraulic in feed................... 0.0002" to 0.004"
Distance wheel centerline to work centerline:
Work diameter reduction per revolution of wheel feed
hand wheel.............................................. 0.100"
Work diameter reduction per revolution of fine knob:
Basic machine........................................... 0.010"
Hydraulic in feed....................................... 0.001"
Maximum hydraulic in feed on diameter for hydraulic
in feed machines........................................ 0.090"
Rapid in feed stroke for hydraulic in feed machines:
Maximum................................................. 2"
Minimum................................................. 1/2"

ELECTRIC MOTORS
Wheel drive motor....................................... 10 HP
Wheel spindle lubrication pump motor.................... 1/4 HP
Work drive motor........................................ 1/4 HP
Hydraulic pump and lubricating drive motor.............. 2 HP
Coolant pump motor...................................... 1/4 HP

GENERAL DATA
Swivel table graduated inches per foot................. 4 1/4"
Degrees included angle................................. 19 degrees
Height from floor to work centerline................... 40 3/4"
Net weight......................................... 10,400 lbs.

EQUIPMENT & FEATURES
Plunge control stepping motor
Hydraulic operated tail stock
Behind wheel tru-form dresser
Landis microtronic controls
Microsphere bearings
Very good operating condition!