Landis 3RH

Swing: 14"
Center distance: 48"
Max diameter with full size standard wheel: 14-31/32"
Min diameter wheel to grind zero diameter work on centers: 9-1/4"
Floor to work centerline: 43"
Traverse speed: 2–240 IPM
Traverse per turn of handwheel slow: .100"
Traverse per turn of handwheel fast: .750"
Standard wheel size: 14" x 1-1/2" x 5"
Grinding wheelhead swivel range upper: 180°
Grinding wheelhead swivel range lower: 60° CW to 30° CCW
Grinding wheel speeds: 1720–2185 RPM
Automatic infeed at table reversal (on diameter): .0003"–.004"
Max distance wheel centerline to work centerline: 17"
Min distance wheel centerline to work centerline: 3"
Work diameter reduction per revolution of handwheel: .100"
Work diameter reduction per revolution of fine feed knob: .005"
Headstock work center: #14 Jarno
Tailstock work center: #10 Jarno
Headstock work speeds low range: 25–125
Headstock work speeds high range: 100–500
Diameter of hole through headstock: 1-7/16"
Headstock spindle nose: 6A-2
Headstock swivel range: 120°
Swivel table graduated inches per foot: 4-3/4"
Swivel table graduated degrees included angle: 23°
Grinding wheel motor: 5 HP
Machine wired: 3 phase, 60 cycle, 440 volts
Overall size machine: 168" L-R x 84" F-B x 72" H
Machine weight: 11,000 lbs
Coolant system size: 62" L-R x 41" F-B x 30" H
Box of tooling size: 48" L-R x 40" F-B x 17" H

Traverse feed selector
Wheelhead ways lubrication pump
Left/right tarry
Traverse rate knob
Headstock speed knob
Rapid power wheelhead positioning attachment
Diamond wheel dresser holder with (1) diamond
Center rest (max capacity: 7")
(2) grinding wheel hubs
Swing down internal grinding attachment
Sheet metal coolant splash guards
Flood coolant
Separate coolant tank with paper drag out