Menu

Landis 6 X 18 2R ANGLE HEAD GRINDER

Ref : 2493261-3-AW
Condition : Used
Manufacturer : Landis
Model : 6 X 18 2R ANGLE HEAD GRINDER
Year(s) : 1978
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

6 X 18 LANDIS MODEL 2R ANGLE HEAD GRINDER
YEAR: 1978

STANDARD CATALOG SPECIFICATIONS
Nominal work swings..................................... 6"
Maximum work swing over table........................... 6 31/32"
Nominal distances between centers....................... 18"
Maximum work swing & diameter standard machine will grind w/full size standard wheel on straight wheel head machine w/hydraulic in feed stroke as noted.................................. 6"‑ 2" H.I.
Minimum diameter wheel to grind zero dia. work on centers on straight wheel head machine........... . . . . . . . . . 15\"
Maximum work swing and diameter standard machine will grind with full size standard wheel on angle wheel head machine with hydraulic in feed stroke as noted
Maximum diameter wheel to grind zero diameter work
on centers on angle wheelhead machines.................. 15"
Coolant pump capacity, gallons.......................... 28
Hydraulic tank capacity, gallons........................ 19"
WORK CARRIAGE
Traverse speed per turn of hand wheel
Slow.................................................... 0.100"
Fast.................................................... 1.000"
WHEELHEAD & WHEELFEED
Grinding wheel size ‑ standard..................... 4"x 24"x 12"
Grinding wheel spindle speeds, RPM................. 1000/1271
Grinding wheel minimum dia. of worn wheel.......... 15"
Hydraulic rapid infeed: Standard maximum........... 2"
Standard minimum........... 1/2"
Hydraulic rapid infeed ‑ Angle
Wheelhead machine: Maximum ............................ 2"
Minimum ............................ 1/2"
ELECTRIC MOTORS
Wheel drive motor ‑ H.P. ..................... 10 HP ‑ 1775 RPM
Work drive motor ‑ H.P. ..................... 1/2 HP ‑ 900 RPM
Wheel spindle lubrication motor H.P. ......... 2
ELECTRIC MOTORS
Hand table rack and gear
Dead center work head
Manual tail stock
Hyd. plunge stepping motor feed
Behind the wheel dresser (Tru-Form)
Taper adjustment on table
Arnold flag gage
Marposse diameter gage
Landis microtronic feed control
Vari-speed work head
Auto lube
No electrics

Other machines similar to Landis 6 X 18 2R ANGLE HEAD GRINDER

1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 1980
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 1980
1
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 1985
1
Location : AMERICA North (USA-Canada-Mexico)