Landis TYPE 1R

Landis TYPE 1R
Year: 1975

NOMINAL SWING OVER TABLE ...................... 10"
MAXIMUM SWING OVER TABLE ...................... 10-7/8"
NOMINAL DISTANCE BETWEEN CENTERS .............. 20"
HYDRAULIC TABLE TRAVERSE .................. 2" TO 240" IPM
TRAVERSE PER TURN OF HANDWHEEL ................ 0.200"
TRAVERSE HANDWHEEL GRADUATIONS ................ 0.001"
SWIVEL TABLE GRADUATED ........................ 20 DEG.

WHEELHEAD:
WHEELHEAD SWIVELS LEFT & RIGHT OF CENTER ...... 90 DEG.
WHEEL SIZE ................................ 12" DIAMETER
MAXIMUM WIDTH, FULL WHEEL ..................... 2"
MAXIMUM HYDRAULIC PLUNGE INFEED - ON DIA....... 0.090"
RAPID INFEED STROKE ........................... 1"
MINIMUM FEED GRADUATIONS - ON DIAMETER ........ 0.000050"
WORK DIAMETER REDUCTION PER REVOLUTION OF
HANDWHEEL ..................................... 0.100"
WORK DIAMETER REDUCTION PER REVOLUTION OF
FINE FEED KNOB ................................ 0.001"
WHEELHEAD MOTOR ............................... 3 HP

WORKHEAD:
WORKHEAD SWIVELS TOWARD WHEELHEAD ............. 90 DEG.
WORKHEAD SWIVELS AWAY FROM WHEELHEAD .......... 30 DEG.
WORKHEAD SPINDLE SPEEDS (6) ............... 60 TO 600 RPM
WORKHEAD SPINDLE NOSE ......................... A2-5"
WORKHEAD MOTOR ................................ 1/4 HP

APPROXIMATE WEIGHT ............................ 4,150 LBS
APPROXIMATE DIMENSIONS .................... 8'L X 4'W X 6'6"HT

MACHINE FEATURES:
UNIVERSAL WHEELHEAD AND UNIVERSAL WORKHEAD
HYDRAULIC TABLE TRAVERSE
AUTO PLUNGE FEED
POWER RAPID WHEELHEAD ADVANCE & RETRACTION
SPARKOUT TIMER
DUAL LIVE/DEAD SPINDLE HEADSTOCK
HARD FILM MICROSHERE WHEEL SPINDLE BEARINGS
CARRIAGE AND WHEELHEAD WAYS ARE AUTOMATICALLY LUBRICATED
MACHINE MOTORS ARE 3/60/220-440 VOLT

EQUIPPED WITH, ACCESSORIES:
SWING DOWN I.D. GRINDING ATTACHMENT WITH SPINDLE
HARDINGE-SJORGREN 5C COLLET CHUCK
EXTERNAL COOLANT SYSTEM WITH TANK & PUMP