Lange B 70 K

Used machine
Features:
Machine table with 13 guide rollers for improved workpiece guidance
Edge feed, synchronized with the belt feed
Edge thickness adjustable via digital counter
Pneumatic roll separation with knife (for edges suitable for cutting)
Three pressure rollers
Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-protecting rubber pad. Digital counter for height adjustment
Direct glue application to the workpiece: Leak-proof glue pot with glue reservoir at the bottom and fast heat-up time after machine standstill
Flush trimming unit for workpiece front and back edges, automatic workpiece scanning, pneumatic trimming with knife for edges ready for cutting
Flush milling unit with vertical scanning and horizontal guide
Reproducible setting via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4000 to 18000 rpm
Cutter Ø 70 mm, Z4, radius 2 mm/15°
Central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm,
Automatic height adjustment of the upper cutter with the belt feed
Workpiece support continuous approx. 1800 mm long, workpiece support rail, extendable approx. 300 mm
Rotating foil table Ø 800 mm

Technical details:
Workpiece width min. approx. 80 mm
Workpiece thickness 10 × 50 mm
Workpiece length min. approx. 220 mm
Edge thickness 0.4 × 2.0 mm
Roll cutting max. 1.0 x 55 mm, 2 x 45 mm
Heating power glue pot 2.7 kW
Electrical connection 400V, 50 Hz, 3Ph + N
Total connection 3.8 kW
Heating time approx. 10 minutes
Pneumatic connection 6 bar
Working height approx. 880 mm
Dimensions approx. 1800 x 700 x 1300 mm without film plate Ø 800
Net weight approx. 260 kg