Midmark Ritter M9 Autoclave Steam
AMERICA North (USA-Canada-Mexico)
The MIDMARK Ritter M9 Ultraclave Steam Sterilizer is intended to be used in medical and dental offices, hospitals, clinics, nursing homes, laboratories, and other facilities to sterilize heat stable and moisture stable, reusable equipment. This device is not recommended for sterilization of liquids intended for direct patient contact.
The M9 UltraClave will begin a sterilization program after the door is fully latched and the START switch is pressed. It will automatically fill the chamber with water to the correct level, and begins the cycle time countdown when proper pressure and temperature are reached. The system will automatically exhaust the steam pressure from the chamber and open the door slightly to facilitate drying after the sterilization phase is complete.
The M9 UltraClave has a tray rack which can hold two small and two large trays. The tray rack can be removed for periodic cleaning of the chamber, tray plate, tray rack, and filter. This system also has two door gaskets, a dam gasket and a door ring gasket. The system also includes a removable power supply cord.
Door Closed Switch
Water Low Indicator
Chamber Temperature Monitor
Pressure Relief Valve
Fault Detection Circuit
Overall Length: 19"
Overall Width: 15"
Overall Height: 16"
Unit Weight: 70 lbs.
Minimum Countertop area: 21" x 17"
Chamber: 9" diameter x 15" depth
Large Tray - 8" W x 12" L x 1" D
Small Trays- 5.5" W x 12" L x 1" D
Water reservoir capacity: 0.88 gal. (3.3 liters)
Electrical 120 VAC, 60 Hz, 12 amps
STANDARD CYCLE PARAMETERS
Unwrapped: 132°C @ 186 kPa for 3 min.
Pouches: 132°C @ 186 kPa for 15 min.
Liquids: 121°C @ 104 kPa for 30 min.
Packs: 121°C @ 104 kPa for 30 min.