Menu

MJ Research PTC-200, THERMAL CYCLER

Ref : 2071632-16-MT
Condition : Used
Manufacturer : MJ Research
Model : PTC-200, THERMAL CYCLER
Year(s) : -
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

WITH DUAL 48 WELL
Thermal range -5 to 105C. but no more than 30C below ambient temperature
(4 to 100C for the Slide Chambers Alpha unit)
Thermal Accuracy - or + 0.3C of programmed target at 90C- NIST-traceable
Thermal uniformity - or + 0.4C well-to-well within 30 seconds of arrival at 90C
(for most Alpha units; see specifications for individual Alpha units)
Parallel One 25-pin 8-bit parallel interface printer port
Serial One 9-pin RS-232 serial port for printer or remote use
IEEE One IEEE-488 bidirectional general purpose interface bus
Display One 20 x 4 LCD alphanumeric display
Ramping speed up to 3°C/sec in models that hold 0.2ml tubes or V-well plates
Capacity Varies with installed Alpha unit
Temperature homogeneity 0.4°C within 30 seconds of arrival @ 60°C for all standard models.
Line Voltage DNA Engine cycler: 100–240 VAC rms
(no adjustment needed among voltages within these ranges)
Accuracy +0.3°C of programmed target at end columns,
30 seconds after the timer starts for the
gradient step, NIST–traceable
Column uniformity +0.3°C of programmed target at end columns,
30 seconds after the timer starts for the
gradient step, NIST–traceable
Column uniformity +0.4°C, well–to–well within column,
within 30 seconds of reaching target temperature
Gradient calculator accuracy +0.4°C of actual well temperature
Lowest programmable temperature 30°C
Frequency 50–60 Hz single phase
Power DNA Engine cycler: 850 W maximum
W x L x H 13x11x9"
Weight 18 lbs