Newman 480-800 Down-Acting Presses

SERIAL #14497.
BURNT PLATE CONSTRUCTION.
ACTUAL BED AND SLIDE AREA IS APPROX 94” L TO R X 40” F TO B.
*PRESS IS SET UP WITH ELECTRICALLY HEATED PLATENS THAT RESULT IN A HEATED AREA OF 80” X 36”.
TOTAL OF 6 HEAT ZONES. RATED TO APPROX 550F.
TOTAL OF 84 CARTRIDE HEATERS (42 TOP AND 42 BOTTOM) THAT ARE APPROX 0.4375” DIAMETER (13 IN EACH LEFT & RIGHT ZONE; 16 IN CENTER ZONE).
EIGHT (8) 10” BORE CYLINDERS WITH 6” DIAMETER RODS AND 12” MAX STROKE.
MAX DAYLIGHT IS APPROX 12” WITH HEATED PLATENS; 18” WITHOUT.
OPERATOR HEIGHT IS APPROX 39.5” WITH PLATENS; 37.75” WITHOUT.
GEAR & RACK GUIDING.

CONTROL SYSTEM INCLUDES:
LARGE FUSED DISCONNECT
CONTROL CONSOLE WITH AN ALLEN-BRADLEY (AB) SLC 5/02 PLC; AB PANELVIEW 550
PALM BUTTONS; RESET AND E-STOP (22” X 26” X 40” TALL)
SECONDARY CONTROL PEDESTAL FOR OPTIONAL SECOND OPERATOR WITH PALM BUTTONS AND AN E-STOP (24” X 12” X 45” TALL)
12” MINISAFE LIGHT CURTAINS FRONT & REAR (MS 4300)
TEMPSONICS LINEAR TRANSDUCER
SIX (6) BARBER COLMAN TEMP CONTROLLERS (0-800F); AMPMETER; TWO (2) SAFETY-PULL WIRES
OPTIONAL 3-STAGE EMBOSSING CONTROLS WITH ADJUSTABLE PRESSURE; DEGAS; ETC…

HYDRAULIC SYSTEM:
TOP MOUNTED 50 GALLON PREFILL TANK
FLOOR STANDING 150 GAL TANK
30 HP MOTOR (230/460V; 1800 RPM; DOUBLE-SHAFT)
VICKERS 25V21A-1C-20-282 PUMP
VICKERS PVB10-RS4-31-CVP-12 PUMP
TOTAL OF 41.5 GPM; RATED TO 3000 PSI
HOWEVER PRESS SYSTEM REQUIRES APPROX 2550 PSI FOR 800 TONS
FANEX ¼ HP MODEL 15L AIR COOLER; VICKERS VALVES; RETURN FILTER
LOW/MED/HIGH PRESSURE ADJUSTMENT KNOBS.

OVERALL DIMENSIONS OF PRESS APPROX 147” X 56” 148” TALL (HEIGHT REDUCED TO APPROX 130” BY REMOVING PREFILL TANK).
WEIGHS APPROX 53,000 POUNDS. POWER UNIT IS APPROX 106” X 68” X 86” TALL.
POWER UNIT AND PEDESTALS WEIGH APPROX 9,000 POUNDS (62,000 POUNDS APPROX OVERALL).
SOME MANUALS AND DRAWINGS.