Newman HP 460-450 Down-Acting Presses

SERIAL #15095.
CLEARANCE L TO R BETWEEN THE FRAMES IS APPROX 78” (APPROX 63” BETWEEN THE STOP BLOCKS).
BOTTOM PLATEN ONLY HAS 3-ZONE ELECTRICALLY HEATED PLATEN THAT IS 1” THICK (PLUS 1” OF INSULATIONS) AND RATED TO 550F.
FOUR HYDRAULIC CYLINDERS: 10” BORE; 6” DIAMETER ROD; MAX STROKE OF 12”.
THE TWO OUTSIDE CYLINDERS ARE DOUBLE-ACTING AND USED TO APPLY PRESSURE AND LIFT THE SLIDE.
MAX DAYLIGHT WITH THE HEATED PLATEN IS 12”; 14” WITHOUT.
BURNT PLATE FRAME CONSTRUCTION.
ADJUSTABLE STOP BLOCKS AT THE FOUR CORNERS.
OPERATOR HEIGHT IS 51.5” WITH THE PLATEN; 49.5” WITHOUT.
GUIDED WITH THE FOUR CYLINDERS AND TWO RACK & GEAR GUIDES.
HARD GUARD ON REAR; 24” LIGHT CURTAINS ON FRONT.

ELECTRICAL CONTROL SYSTEM INCLUDING ALLEN-BRADLEY SLC 5/02 PLC
ALLEN-BRADLEY T-CAT
LINEAR TRANSDUCER; VOLTMETER
DIGITAL PRESSURE READ-OUT; 3-ZONE HEAT ON/OFF.
1ST, 2ND AND 3RD PRESSURE STAGES ON/OFF
EMBOSSING DEPTH ON/OFF
OPTIONAL ADJUSTABLE PRESSURE ON EACH STAGE
FREE-STANDING CONTROL CONSOLE
460 VOLTS; 200 AMP DISCONNECT; PALM BUTTONS ON CONSOLE, ETC…

FREE-STANDING HYDRAULIC POWER UNIT:
20 HP MOTOR (230/460 VOLTS; 1200 RPM)
150 GALLON RESERVOIR
VICKERS RELIEF VALVES
THERMAL TRANSFER A05 COOLER
VICKERS RCS-10-B1-30EA COUNTER BALANCE VALVE; ETC…

APPROX SPEEDS: 60 IPM FAST CLOSE; 3 IPM PRESSING; 130 IPM FAST OPEN.
OVERALL DIMENSIONS: PRESS 114” X 42” X 115” TALL
HYDRAULIC UNIT 89” X 43” X 68” TALL
CONTROL CONSOLE 38” X 28” X 58” TALL.
APPROX 34,000 POUNDS.