Omga T2006 OPT 6000 CE Push-Feed Optimizing Saw

The pusher carriage, complete with a camera for detecting chalk marks identifying the defects and a sensor for the length of the board,
lifts up pneumatically in order to completely scan the board during its way back to loading position
Total optimization managing up to 3 different grades
A vertical pneumatic gripper allows strict tolerances on the cut lengths +/- 0,15 mm (.006")
Maximum Feed Rate of 240 m/min
Windows 7 opperating system, is complete and user friendly
Two clamps on the sides of the saw blade ensure the correct positioning of the material against the fence both during the feeding and during the cutting cycle
Maximum Width of Cut: 300mm
Maximum Thickness of Cut: 120mm (4.72") with the optional 500mm blade
Maximum incoming Length: 6000mm (19'8")
Saw Blade Motor: 5.5KW (7.37HP)
Computer is capable of cutting to length, optimization based on length, defecting, optimization between defects, an optimization between defect w/ selection of 3 different grades
Metric or Imperial Measurements
Specifications are written to the best of our knowledge with some being sourced from literature, we encourage you to inspect the machine and verify