Perkin Elmer Radiomatic 625TR, Flow Scintillation Analyzer
EUROPE (Western and Northern)
TR-LSC electronic background discrimination
2 analog input channels
Full color display
IPA and 3D analysis
Homogeneous option includes the built-in LS cocktail pump
Pressure sensor and diverter
Kit, ProFSA manual
14C calibration standard
Multichannel Analyzer (MCA) for precise energy discrimination in keV units.
Spectrum Analysisfor optimizing energy window settings to provide better detector efficiency and sensitivity particularly for dual label applications. A hard copy printout provides a complete graphical representation of the radionuclide's energy distribution.
Dual matched two inch (5 cm) photomultiplier tubes with coincidence circuitry for maximum efficiency and sensitivity.
Luminescence detection and correction allows independent channel selection for the detection and correction of chemiluminescence interference. Chemiluminescence percentages are reported on hard copy printout.
Two independent radiochannels for single or dual label separations with update times from 1 to 60 seconds.
Preset energy windowsin keV for 3H, 14C, 35S, 32P, and 125I.
Programmable event control provides on/off control of the LS pump amd flow diverter valve during a run.
Over-pressure alarm and eluate flow diverter to protect against system damage due to blocked lines.
Instrument ready signal for the coordination of sample injections.
80-character liquid crystal display and 20-key touchpad for controlling the detector, setting run conditions, and viewing the run data in real time.
Digital interface logic for fraction collectors, autoinjectors, and HPLC system controllers.
Four analog data outputs, one fixed and one variable scale for each of two radioactive channels with a scaling range from 10 to 10,000,000. The output can be directed to chart recorders, integrators, "smart" fraction collectors, or chromatography workstations for further processing.
Menu-driven multi-user analysis software with on-line storage and recall for five user protocols, three gradient quench curves, and ten sets of run data.
Peak integration softwarewith threshold smoothing, peak area reject, and results in your choice of counts, net counts, CPM, isocratic DPM, or gradient corrected DPM.
Continuous run acquisition which when selected acquires and directs data via the analog output port to integrators or a chromatography data workstation.
Half-life correctionto any specified date and time performed in real time per update; single or dual label correction for short half-life radionuclides.
Quench curvecreation and editing for single or dual label applications.
Fraction collector controlwith threshold and delay selection.
Internal lead shielding for reduction of background counts
Integrated liquid control tray which directs liquids to a waste container.
Instrument confidence tests which provide pass/fail system diagnostics.
CSA approval ensures compliance with the electrical and safety requirements as set by the Canadian Standards Association (CSA).
RS-232 serial data output interface for the output of processed or raw radiochromatography data