Raimann KM 310 BV EDGER 1 FIXED BLADE 1 MOBILE BLADE DIGITAL POSITIONING WITH SEPARATOR & RETURN OFFERED WITH NEW DRIVE CHAIN MAT & SLIDES

EDGER 1 FIXED BLADE 1 MOBILE BLADE DIGITAL POSITIONING WITH SEPARATOR & RETURN
OFFERED WITH NEW DRIVE CHAIN MAT & SLIDES

MACHINING CAPABILITIES:
- Maximum width between slats: 310 mm
- Clearance width to the right of the blade: 150 mm
- Maximum passage width: 850 mm
- Cutting height (thickness): 10 to 80 mm
max 70 mm with the pressure plate
- Minimum length: 600 mm
400 mm with option on short wood (contact us)
- Feed speed: 5 to 30 m/min
- Blade speed: 4200 rpm

COMPOSITION :
- Mechanically welded frame
- Feed belt or chain width 340 mm
Slide lubrication system, gauge reserve on operator side
Height from the ground (working height): 850 mm
Adjustable and pneumatically retractable entry guide
- 1 fixed laser and 1 mobile controlled by cable
- Remote console and pedals (sheath length min. 4m)
Digital display for speed managed by variator
Digitized blade positioning
10 customizable odds presets (shortcuts)
Saving up to 200 items
- A useful fixed blade holder sleeve L 100 mm and 1 mobile
- Blade shaft Ø 65 mm
- Set of rings and tightening key
- Blades Ø 300 mm Bore Ø 80 mm
- Height adjustment with mechanical indicator on steering wheel
- Lubrication device for blade cleaning by spraying controlled from the console
- Additional notched drive roller at the exit
- Separator table L 2.50 m
Smooth tilting plates to the right and left with pneumatic control.
Width: 500 mm on the right, 860 mm on the left.
Transverse adjustment by screw and manual handwheel of the separation line.
Allows the evacuation of the edge on the right and the return of the product on the left.
Control can be coupled with the edger.
Dimensions for transport: 2500 x 1300 x h.900 mm
- Belt conveyor return to operator
Conveyor belt 4200 x 500 mm
0.37 KW gear motor
Guide angle in lower part 2800 x h.100 mm
Length 4.30 m End height 700 mm
Dimensions for transport: 4300 x 700 x h.720 mm

MACHINE FEATURES:
- General power supply: 400v. Three-phase 50 Hz
- Installed power: IN MAX 63 A (Nominal 40A)
- Saw motor: 15 kW (20 hp)
- Feed motor: 0.75 kW
- Compressed air, required working pressure: 6 Bars
- Upper mouth suction: Ø 200 mm
Recommended flow rate: 3400 m3/h Speed 30m/s 1470 Pa
- CE marking
- Lockable contactor, disconnector, shock stops

Dimensions for transport (LxDxH):
The edger: 1850 x 1700 x h.1500 mm
The desk: 700 x 700 x h.1250 mm
Weight: 2300 kg