Rebuilt Complete Plastic Lumber Profile Extrusion Line

Profile Line Includes:
One (1) Rebuilt 4.5 Sterling Extruder, 32:1 L/D, Mfg.1990,
Rebuilt 2003 Electrically Heated, Air Cooled, Vented,
200 HP General Electric DC Motor (rebuilt), New Digital Drive,
New Heat Controls.
One (1) New Die, 5/4 x 6 for Lumber.
One (1) Sizing Sleeve.
One (1) New 15 ft. Vacuum Sizing Tank with 2.5’ Vacuum, Stainless Steel, Completely Automatic Directional Adjustment with Vacuum and Circulation Pump.
One (1) New 30 ft. Cooling Tank,Stainless Steel, with Circulation Pump.
One (1) New Stainless Steel Holding Tank,48" Wide x 33" Deep x 120" Long with Float Make-up, Heat Exchanger, Y Strainer, Water Recycle Pump and NEMA 4X Motor Starter. Base frame is stainless steel. Plumbing is copper.
One (1) Used OEM Puller/Saw Combo, Model #PAS-#UL, Mfg. 1993, 12"W x 10' Puller Belt,
Cut Off Traveling Saw Blade 18" Diameter, Contact for siding, lumber or large profile,
New RM5, 5 HP AC Inverter with Remote control, New 5 HP AC Motor.
One (1) New Dump Table, Air Actuated.
One (1) Used Advantage 20 Ton Chiller, Model #C20WPSP405RX,Year Mfg. 1993, 60 Amp Full Load / 460 Volt, Single Stage Unit.
One (1) Used Grinder, Conair Wor-Tex,Feed Opening 11" x 15", 3 Knife, Open Rotor, 60 HP, Complete with Blower, Cyclone and Electricals.