Sanyo MCO-19AIC CO2 Incubator

External dimensions 620 x 710 x 900 mm (W x D x H)
Internal dimensions 490 x 523x 665 mm (W x D x H)
Interior volume 170 L
Access port Inner diameter: 30 mm, On the back side
Trays 4 trays made of stainless steel containing copper

450 x 450 x 12 mm (W x D x H), Maximum load: 7 kg/tray
Insulation Rigid polyurethane foamed-in place
Heating system DHA system (heater jacket + air jacket system)
Heater 314 W
Humidifying system Natural evaporation with humidifying pan
Temperature controller PID control system
Temperature display Digital display
CO2 controller PID control system
CO2 density display Digital display
Air circulation Fan assisted
Temperature control range +5°C above ambient to 50°C (in a 5°C to 35°C ambient).
Temperature control uniformity ± 0.25°C in 25°C ambient, setting 37°C, 5% CO2, no load.
C02 control range and deviation 0% to 20%, ± 0.15% in 25°C ambient, setting 37°C, 5% CO2, no load.
C02 sensor platform Ceramic based, single beam Infrared sensor, with dual wavelength measurement for continuous auto-zero calibration
Air filter 0.3 Pm, Efficiency: 99.97% or higher
UV lamp 4W X 1 (ozone-free emission)
Water level sensor Optical
Alarms Automatic set temperature alarm, Automatic set CO2 density alarm,

Upper limit temperature alarm, Door alarm, Low humidifying water alarm,

UV lamp failure alarm (for UV equipped model only)
Remote alarm contacts Allowable contact capacity: 30 VDC, 2 A
CO2 inlet connection 4 to 6 mm diameter tube
CO2 inlet pressure 0.03 MPaG (0.3 kgf/cm2 G, 4.3 psiG)
Weight 93 kg