Soraluce FP 8000 Variable

SORALUCE FP 8000
built: 2010
control: HEIDENHAIN iTNC 530


Travels  
Longitudinal movement (X-axis) 8.000 mm
Transverse movement (Y-axis) 1.500 mm
Vertical movement (Z-axis) 2.600 mm

 
NC –Rotary sliding table, Fabr. FIBRO  
Clamping surface 3.000 x 2.500 mm
V-Axis (translational movement) 2.000 mm
Max. workpiece load 40.000 kg

 
Floor plate  
Clamping surface 4.500 x 2.000 mm
Max. workpiece load 10.000 kg/m²

 
Feeds & rapid traverse  
X-, Y- und Z-Axis, stepless 2 - 20.000 mm/min
Rapid traverse in X / Y / Z Achse 35 m/min

 
Automatic tool changer ATC  
Tool places 40 Plätze
Max .Tool diameter 125/250 mm
Max. Tool length 400 mm
Max. Tool weight 20 kg
Change positions Horizontal / Vertical
Tool changer mounted at the column side and travelling together with the spindle.

 
Coolant system with chip conveyor
Coolant outlet at the front of the milling head via manually swiveling nozzles
Internal coolant supply through the spindle center
Tank volume approx. 1,500 l
Normal coolant supply 25 l/min 5 bar
High pressure pump for internal coolant 20 l/min 15 bar
Coolant tank incl. magnetic separator and paper belt filter
Hinged belt chip conveyor along the X - axis of the machine
1 cross conveyor on the right side

Equipment & Accessories
Machine bed, column and vertical saddle as cast iron construction, heat-treated for stress relieve
Milling slide as cast iron construction, heat-treated for stress-relieve
Universal milling head, positioning via Hirth toothing, front plane 1°, rear plane 1° - changeable automatically *Milling head was overhauled by the manufacturer*
Facing head D'Andrea UT 5 - changeable automatically
spindle extension L = 950 mm - changeable automatically
oil cooling unit for cooling of milling spindle motor and milling head
spindle drive 32 kW
spindle speed max. 4.000 min-1
Axis drives by means of precision ball screw spindles and digital servo motors
3-D measuring touch probe system with radio transmission
CNC control HEIDENHAIN iTNC 530 incl. digital drive technology
Portable electric handwheel HEIDENHAIN HR 410
Travelling operator platform
Automatic tool changer with 40 magazine positions, change position horizontal/vertical
Coolant system with external shower ring and IKZ through the spindle, magnetic separator and paper belt filter
1 pc. chip conveyor lengthwise in the working area, 1 pcs. cross conveyor on the right side
Precision linear guides in all axes
Precision ball screws in all axes
Direct measuring system in all axes
Hydraulic counterbalance in the vertical axis
Telescopic steel cover of the X-axis
Milling slides closed at the top and bottom of the vertical axis with rolling belts
FIBRO rotary transfer table, clamping surface 3.000 x 2.500 mm
40.000 kg workpiece weight
1 pc. panel field 4.500 x 2.000 x 300 mm
1 pc. pick-up station for automatic milling head change
Milling head, spindle extension and D'Andrea facing head are automatically changed in and out via CNC program
Air conditioning for electrical cabinet
hydraulic system
workspace lighting
Painting RAL 7035 grey white/RAL 5011 steel
Operating hours: Machine ON approx. 31,000 h, program run approx. 12,000 h