Sulzer P7M R3 B 280 N2 SP 012 280

1 x used Sulzer Projectile Weaving Machine P7M R3 B 280 N2 SP 012, y.o.c. 1999
Working width: 280 cm
Loom was specially reinforced in year 2016 for heavy fabrics

– machine structure in R3 design
– main drive 5,0 kW, 380 v, 50 Hz
– reinforced sley, 4 degrees
– microprocessor controlled devices
– connector for data monitor
– frequency controlled main drive motor
– blow off device at picking lock with external air supply, 6 pressure bar
– 1 electronic pick counter for 5 shifts integrated in the system
– 1 light barrier
– 1 reinforced main drive R3 design
– 2 electronically controlled warp let-offs for half warp-beams for disc diameter up to 940mm, tube diameter 216mm, incl. sensors and electr. Connections
– 1 warp tensioner reinforced, supplementary warp deflection, R3 design
– 1 warp stop motion
– 6 contact bars for warp stop motion
– 1 reinforced dobby Stäubli 2665 MR3 with 10 jacks
– 10 reinforced shaft drives for distance between end eyes of healds of 331 mm
– 1 floating take-up roller Ø 140mm, R3 design
– 1 set of guide teeth in block form, divided half/half
– 1 set projectiles D12
– 1 set of half cross leno Klocker at picking and receiving side, with cutting device incl. take-up device for cut selvedges
– 1 half cross leno Klocker in the center, with cutting device, for 2 width weaving
– 2 separate thread bobbins for auxiliary selvedge
– 2 electronically controlled weft yarn brakes, system Sulzer
– 2 electronic weft detectors, type Löpfe L1
– 1 temple pair with temple cylinders, short, with pressure from above, complete
– 1 spreader bar
– 1 slow motion gear with automatic pick finding and shaft levelling device
– 1 lubrication device GS
– 1 step board, warp beam side
– 2 full warp beams, disc Ø 800mm, tube Ø 216 mm
– 1 bobbin stand with bobbin holders
– 2 weft feeders IRO Galaxy
– 1 batching motion type GROB, with traverse motion
– 2 winding cores