Totani FD-60DL67SC Pouch making Machine

Width: 640mm
TOTANI POUCH MAKING MACHINE for Bottom Film Folded type of Stand-Up (2-Up) and (1-Up)
Type of bags: Doypack (2 Lanes), stand up (2 Lanes), 3 side weld, pet food…
Speed: Max 240 bags/min

A. Unwind & Gusset Punch Section
1- W1600 mm Main Unwind Unit
2- 3″ Pneumatic Shaft (for W1600 unwinder)
4- 6″ Air Chuck for 3″ Pneumatic Shaft and Inflator Tool
1- Dancer Unit
1- Infeed Servo Motor Control Unit with Rubber Roller
1- EPC (Edge Guide Control) Unit
1- Frame for bottom punching device
1- Bottom punching device: 4units (8 holes) *toothed blade type (not male and female)
8- Punching Blade for bottom punching (Dia. 16mm) *air slug removal type
1- Vacuum system for bottom punch waste
1- Mark sensor unit to control the bottom punch position (sensor from bottom side)

B. Stand-Up pouch Additional equipment (2 Pouches /cycle)
1- Stand-Up Pouch making equipment
1- Registration system for longitudinal heater unit
1- Wider heater (W100) and cooler (W110)
8- K-Seal bar for Stand-Up Pouch

C. 1- Vacuum system for round corner punch and notch waste
D. Side Gusset Forming Section
1- Gusset Forming Unit 1- Middle Dancer Unit

E. Longitudinal/Side Sealing Section
2- Longitudinal Heater and Cooler (Heater L920 mm x W60mm, Cooler L460mm)
2- Drop down system for the above heaters
1- Teflon Winder

F. Cross/Bottom Sealing Section (Frame Length =6200mm)
1- Infeed Servo Motor Control Unit with Rubber Roller
5- W50mm Cross Heater
5- Drop down system for the heaters
2- W60mm Cross Coolers
1- Mark Sensor Automatic Tuning (sensor from top and bottom side)
1- Splice detector system for the main web
1- Tension control dancer unit
1- Main Servo Motor for Heater Up-Down
1- Temperature Control
1- Slitting device with 5 razor blade holders

G. Finished Pouch Section
1- Double Cutter Control Device (Max. Double Cut Width: 3mm)
1- Infeed Servo Motor Control Unit with Rubber Roller (with 50mm segmented roller in the middle)
1- Indexing Conveyor Table for Stacking Finished Pouches (L=1500mm)

H. Miscellaneous Items
1- Round corner punch device with base (for 2-up)
2- Round corner punch blade (center, R10/W0,2)
4- Round corner punch blade (both edges, R10/W0,2)
2- Trim Edge Rewinder with Caster
2- Notching Device (Depth 300mm)
2- Mounting Base for Notching Device
2- Notching Blade (Hexagonal Shape 2x4mm)
2- Waste Collecting device
20- Straight Sealing Bar (Aluminum) for cross heater
4- Straight Sealing Bar (Aluminum, Width 10mm) for longitudinal heater
4- sets of SP Bottom Sealing Bar (Aluminum) *Parabolic type
2- Handle Punching Device with Mounting base
2- Handle Punch Blade (Oval / 20x80mm)
10- Forming plates
1- Transformer (380V to 200V)
1- Safety Light Curtain System (for CE regulation)
1- Instruction Manual in English
1- Display in English
Zipper application equipment
1- Frame for zipper section
2- Zipper heater (640mm) and cooler (330mm)
3- Zipper guide plate with water cooling facility (center plate W70, 80, 90)
2- Zipper insertion device with splice detector
1- Rubber roller unit controlled by servo motor
2- Zipper unwind unit (with larger rollers)