TYMI Comet-126 Laminator

automatic calender
In work, no damages

Specification:
COMET-126, automatic calendering machine with water heating (China).
Technical specifications:
Maximum width
Maximum sheet format
Minimum sheet format
Range of materials
Shaft pressure
Diameter of the calender
Conveyor speed
Power consumption
Dimensions
Because
1180 mm;
1200x1200mm; 340x406mm;
250 - 600 g/sq.m;
up to 250 kg/sq.m.cm; 600MM
12-40 m/min;
71.25 kW, 380 V, 50 Hz 3 phase; 12300x2290x1925 MM;
6234 kg

Product Characteristics:
A powerful machine for calendering varnished printing prints.
Automatic self-loading with cascading sheet feed allows you to work at a maximum speed of up to 40 m/min.
The calendering finish gives the prints an increased gloss and gloss.
Pressing is carried out using steel and rubberized shafts, as well as a stainless steel belt heated to 160 Steel belt under
It presses the impression by pressure, increasing its smoothness and evenness of the surface.
The machine is equipped with automatic acceptance
Self - storage self-loading is freely regulated in the course of work
- equipped with double sheet sensors
the ability to change the feed rate depending on the type of paper - the engine stop system minimizes spoilage of products

Calender
- consists of a chrome-plated cylinder, a pressure cylinder and a calendering belt -the pressure
cylinder is covered with a layer of specially prepared rubber to maintain the necessary pressure
- the design of the calendering cylinder allows you to maintain a pressure of up to 250 kg per cm2,
the temperature of the cylinder is controlled by thermal sensors
- the cylinder is heated by water
Thermal conveyor
- it is an endless stainless steel belt - -work safety is ensured by a system of photocells
- cooled by fans
Acceptance pneumatic acceptance equipped with colliders on both sides of the foot - equipped with a sheet counter
- equipped with automatic lifting or lowering of the foot
- Automatic slipway acceptance:
- Reception table with transport belts
- Adjustable colliders and foot stops
- Slipway platform
- Automatic lowering of the foot
- Max. foot height, mm: 950

Accessories:
- Steel BELT (STAINLESS steel) made in Japan
- Electric heating elements - made in Japan
Control of heating elements made in Taiwan Photo sensor of steel belt made in Taiwan
-Engine calandra - made in Taiwan
- Self-loading and acceptance inverters made in Taiwan - Self-loading compressor made in Japan
-Hydraulic system made in Japan
- Bearings - made in Japan

Completeness of delivery:
- Self - storage
- Calender with electric heating
- Slipway acceptance
- Stainless steel belt welding device
- Spare stainless steel belt
- A set of tools for maintenance
- A set of spare heating elements (6 pcs.) - A set of self-loading suction cups (20 pcs.)
- rubberized shaft (diameter 356 mm)