Menu

UP-ACTING FOUR-POST HYDRAULIC PRESS

Ref : 2177304-6-GO
Condition : Used
Manufacturer : -
Model : -
Short Description : UP-ACTING FOUR-POST HYDRAULIC PRESS
Year(s) : -
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

475 TON 42” L TO R X 35” F TO B UP-ACTING FOUR-POST HYDRAULIC PRESS
Nominal bed size: 42” x 35”.
Overall left to right is 62” and front to back between the posts is 15”.
Fully guided with 12” bushings on 7.5” diameter posts.
22” diameter ram rated to 2500 PSI with approx. 24” max stroke.
Daylight is adjustable in 4” increments from approx. 29” to 49” (currently set at 41”).
Operator height approx. 54”.
Tee-slotted bed and crown.
Side push-back cylinders: 3” dia x 50” stroke (17 tons of force).

Electrical control system:
Allen-Bradley Micrologix 1200 PLC; three adjustable prox switches
208 volt 3 phase (can be converted to 480 volt relatively easy); 200 amp disconnect; etc…

Floor standing hydraulic power unit:
Approx. 225 gallon overhead tank; drip pan; 40 and 10 HP motors (wired for 208v)
Approx. speeds: 100 IPM open/close; 12 IPM pressing (full tonnage available thru entire pressing stroke)
Water cooler; suction and return filters; etc…

Overall approx. press dimensions: 98” x 56” x 164” tall (height reduced to 137” with side cylinders lowered for shipping).
Hydraulic unit: 72” x 52” x 93”:
Weighs approx. 35,000 pounds.
Note: press was rebuilt in 2005 (controls, hydraulics, bushings, etc…) and since then only slightly
used for prototype development. Electrical and hydraulic prints.

Other machines similar to UP-ACTING FOUR-POST HYDRAULIC PRESS

1
Location : AMERICA North (USA-Canada-Mexico)
1
Location : EUROPE (Western and Northern)
4
Location : United States (USA)
1
Location : EUROPE (Western and Northern)
Year(s) : 2014