VEA ENTRY 1300X Laminator

Solventless
With 16 green conveyor rollers
1×44cm + 2x50cm + 1×54cm + 1×54,5cm + 1×59cm
1×61 cm +1×69 cm + 1×72 cm + 1×75 cm + 1×86 cm
1×89 cm + 1×95 cm + 1×99 cm + 1×110 cm + 1×123 cm
3 red spreader roller/presser
1 conveyor roller carrier up to 18-places
1 matrix mixer – for solventless two-component adhesives with filling of the resin component – ​​cm.154 x 120 x 80 – 5 kw – prod 90 kg/h
Film nominal with 1300 mm
Max film width 1315 mm
Max spreading
Minimum film width 50 cm

Maximum throw film unwinding kg.25

Maximum shooting film in wrapping – descending pull kg.35
Minimum film unwinding kg.3,5
Maximum film thickness in wrapping 300 microns
Maximum diameter winding / unwinding rolls cm.86
Maximum weight of reels winding / unwinding kg according to the material
Unwinding core diameter from 3 to 6 inches

Inch wrapping core diameter 6
Maximum film speed m/min 300
Water supply for heating units
Fluid to use: water
Minimum pressure 1 bar
Maximum pressure 3 bar
Water hardness from 9 to 12 French degrees
Consumption (liters / hour only in case of intervention of the cooling circuit) 600
Supply line («G) 3/8

Pneumatic supply: dehumidified, non-lubricated air
Pneumatic pressure from 7 to 10 bar
Air consumption liters / min 60
Supply conduit diameter («G) 3/8
Power supply for cooling calender: water
Maximum pressure 3 bar
Water Hardness from 9 to 12 French degrees
Flow rate (liters)
Supply line («G) 3/4