Collette, Vector GRAL10 Granulator

Ref : 2291567-16-GO
Condition : Used
Manufacturer : Collette, Vector
Model : GRAL10
Short Description : Granulator
Year(s) : 1997
Quantity : 1
Location : Seller or machines location:
AMERICA North (USA-Canada-Mexico)

Power Supply: 480 Volts / 60 Hz / 3 Phase.
Largest / Full Load: 6A.
Construction: Stainless steel product contact surfaces,
Capacity: 10-liter non-jacketed bowl,
manual bowl lift on base Chopper Power: .75/.55 kw 220 volt

General Information
Granulators and High Shear mixers are an effective means
for turning powders into dense granules for tableting or coating.
To create the granules, powders are added to the mixing bowl
and the bowl is sealed. If necessary a dry binder may be added
with the powders or dispersed into the granulating liquid.
A large impeller spins at fairly slow speeds spinning
the powders into a vortex. After the powders are blended together,
the liquid is added to the product using a pump
or pressurized container. A chopper tool located in the bowl spins
at fairly high speeds shearing the granules and removing air.
The mixing continues until the desired end granule size
and density is achieved. The endpoint is often determined
via power consumption or torque of the main mixing tool drive

Other machines similar to Collette, Vector GRAL10 Granulator

Location : EUROPE (Western and Northern)
Year(s) : 2005
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 2005
Location : AMERICA North (USA-Canada-Mexico)
Location : AMERICA North (USA-Canada-Mexico)
Year(s) : 1999