Wean United STEEL EXTRUSION PRESS 1600 Ton

WEAN UNITED STEEL EXTRUSION PRESS
Year 1985

1. OD and thickness for:
- Dia. 100 container: Min - 30*5mm , Max - 42*8mm
- Dia. 125 container: Min - 32*5mm, Max - 64*20mm
- Dia. 150 container: Min - 38*4mm, Max - 80*30mm
2. Type of lubricant for SS Pipe - glass powder
3. Yield ratio - 4% of wastage
4. Tolerance on OD. thickness and ovality of pipe - according to

international rules of the hot rolling products
The Press:
- Nominal Static Capacity.....1600 tons
- Function Presure............315 Kgf/cm
- Nominal Capacity of device for the shifting of Fishing Tap:
- Advance................................... 100 tons
- Pull Back................................. 160 tons
- Principal Piston Stroke................... 1900 mm
- Stroke of Piecer.......................... 900 mm
- Container Stroke.......................... 380 mm
- Range of the Billets Diamters............. 95-180 mm
- Range of the Billets Lengths.............. 250-700 mm
- Maximum speed for Extrusion to 80% of Press Capacity 200
mm/sec
- Nominal complete cycle time push to push.. 14 seconds

Air-water Accumulator Station
- Working Nominal Pressure............. 315 Kg/cm2
- Number of High Pressure Containers... 1
- Total Volum of Accumulator........... 3 m3
- Useful Water Vilume.................. 450 liters
- High Pressure Pumps number........... 2
- Pump Capacity........................ 320 l/min
- Revolution of Planetary Spindle...... 332 rpm
- Absorption Pressure.................. ATMOSPHERICS
- Engine for Pumps acting.............. 200 Kw 1500 rpm
- Reducing Rapport..................... 4,49

Oil Hydraulic Units
- For Press Adjustment Device:
- Tank Volume............. 367 liters
- Engine for Pump acting.. 7,5 Kw 1500 rot/min
- For Fishing Tap Shifting Device, Container, Screw Sliding and
Auxiliary Equipment:
- Tank Volume............................. 5000 liters
- Engines for Pump's acting (4 pieces).... 55 Kw 15000 rot/min

Pneumatic Devices
- Air Pressure for Auxiliary Equipment..... 5-7 Kgf/cm2
- Air Pressure for Water Valves............ 2,5 - 2,8 Kgf/cm2

Electric Engines for Auxiliary Equipment
- Engine of Saw............................ 22 Kw 1500 rot/min
- Brush Engine............................. 3 Kw 1500 rot/min

Press Features:
Internal Piercing
Aldrich High Presssure Pumps
Run Out Table & Stacking System
Numerous Spare Containers
Large Amount of Tooling for Various Hollows Shapes and Sizes
Otto Junker Induction Heating System
Die Cleaner