Used Biotech / Pharmacy Packaging

KMC has thirty two (32) of these Anthony Kent & Ross 4" x 8" laboratory three roll mills (TRMs) in stock and r... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

keyed, 7/16" max. tablet, missing upper guards & other parts Location : AMERICA North (USA-Canada-Mexico)

Price : On request

This is a standard Stokes F Press which can press a tablet up to ¾" max. diameter at speeds up to 95 tablets p... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Single sided, good condition Location : AMERICA North (USA-Canada-Mexico)

Price : On request

accepts"D" tooling, 1"max diameter. Location : AMERICA North (USA-Canada-Mexico)

Price : On request

all stainless steel construction including bin arm base plate, pedestal, drive covers and operator panels desi... Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

316 stainless steel product contact surfaces with 8.5", 11.5", 13", 14.5" and 16" diameter perforated pans wit... Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Capacity: 24,000-50,000 capsules/hr max. Pressure: 0.4 - 0.6 Mpa. Air Supply: <; 0.1m3/min. Electrics: 3Ph/60H... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Includes spray arm (no guns which can be supplied at added cost) Includes Thomas Spray 4 spray system. Air han... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Single sided station "B" tooled keyed uppers, precomression forced feeder. Manual controls for upper punch pen... Year(s) : 1987 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Keyed, double sided, accepts 1.1875" dies upper punch penetration Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Maximum tablet diameter is 5/8" (16mm). Single sided. Has VFD, has push button starter currently set 3/60/208V Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Pre-compression and main compression box type lexan guards, single sided, accepts "B" tooling (1.1875") with m... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Designed for core tableting, 1.1875" dies, 3/60/220V Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Type 36-3, S/N JT-654. Includes optimal vertical screw feed drive with stainless steel hopper, portable Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Stainless steel product contact surfaces control panel, 208 volt, 3 phase, 60 Hz Comes with Mixing Blade and C... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Unit comes with 2 interchangable pans, 18 Inch and 24 Inch. Location : AMERICA North (USA-Canada-Mexico)

Price : On request

drying/granulation bowls with wurster bowl steam heated AHU with freeze protection coil chill water pre-heat,... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

850 liter Stainless Steel High Shear Granulator with sweep impeller, high speed chopper pneumatic discharge va... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Accepts full "B" 1.1875" dies, keyed, double sided open feed frames, upper punch penetration square frame, wit... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Includes castered control panel Catalog rated at 200 kg/hr - 750 kg/hr. Motor approximately 3HP Location : AMERICA North (USA-Canada-Mexico)

Price : On request

16 Station Keyed turret, accepts "B" dies, no feeder assembly Location : AMERICA North (USA-Canada-Mexico)

Price : On request

standard 16 station Cadmach which can make a maximum tablet diameter of 1" (25.4 mm) @ speeds to 500 T.P. minu... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

with: 1 grinding container each made of stainless steel 500 mL and 125 mL. Key control panel with LCD display... Location : EUROPE (Western and Northern)

Price : On request

Location : AMERICA North (USA-Canada-Mexico)

Price : On request