Used Biotech / Pharmacy Packaging

Stainless steel construction, on base with variable speed motor drive, 110 volt Location : AMERICA North (USA-Canada-Mexico)

Price : On request

THE UNIT IS MOUNTED TO A ADJUSTABLE TELESCOPIC STAND. IT WILL HANDLE TABLETS UP TO 16 MM (5/8") DIAMETER. 11 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Stainless steel construction, on base with variable speed motor drive, 110 volt, Serial No. 1.152., tablet d Location : AMERICA North (USA-Canada-Mexico)

Price : On request

45 stations, 3/4" max. tablet diameter, 10 ton compression pressure, double sided with force feeders, rate Location : AMERICA North (USA-Canada-Mexico)

Price : On request

ALL STAINLESS STEEL CONSTRUCTION, FOR TABLETS/CAPSULES UP TO 1/2 INCH THICK, VARIABLE SPEED WITH SYNTROL VIB Location : AMERICA North (USA-Canada-Mexico)

Price : On request

SINGLE LANE STAINLESS STEEL, VARIABLE SPEED. 120/60/1 Year(s) : 1983 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Rx-Fill PLUS has a two-tray two-channel design with large hopper Accurately count product in a packaging cell Location : AMERICA North (USA-Canada-Mexico)

Price : On request

THIS IS A LAB SIZE TABLET COUNTER WITH A 2 STATION DROP AND 5 PLACE COUNTER. IT HAS A 16" ACCUMULATING TABLE Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2 AMP, 115 VOLTS, 50/60 CYCLES, SINGLE PHASE, FULL STAINLESS STEEL GMP CONSTRUCTION. ABLE TO COUNT FROM 1-10, Location : AMERICA North (USA-Canada-Mexico)

Price : On request

This machine weighs tablets from . 1mg to 100 grams, checks thickness from 1 to 15 mm, dia meter from 1 to 25m Location : AMERICA North (USA-Canada-Mexico)

Price : On request

MACHINE IS DRIVEN BY 110 VOLTS, 1 PHASE, 60 HZ. IT IS EQUIPPED WITH 2 FUNNELS, SINGLE DROP. THE COUNTER WIL Location : AMERICA North (USA-Canada-Mexico)

Price : On request

110V 60Hz 1PH, w/ turntable and vibratory feeder controls and batch counter w/readout Location : AMERICA North (USA-Canada-Mexico)

Price : On request

110 VOLTS, 1 PHASE, 60 HZ. Location : AMERICA North (USA-Canada-Mexico)

Price : On request

THE MACHINE CAN HANDLE ALL SHAPES AND SIZES OF COMPRESSED TABLETS, DRAGEES, LOZENGES AND SOFT AND HARD GELAT Location : AMERICA North (USA-Canada-Mexico)

Price : On request

THE MACHINE IS SET UP FOR BEADS WITH ONE SET OF CHANGE PARTS Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Location : AMERICA North (USA-Canada-Mexico)

Price : On request

AND WAS USED FOR A PRODUCT TEST, BUT WAS NEVER PUT INTO PRODUCTION. IT IS RATED AT 170 BLISTERS PER MINUTE, Year(s) : 1994 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

WITH GUK MODEL PACLINER-6 CARTONER Location : AMERICA North (USA-Canada-Mexico)

Price : On request

250 MM Location : AMERICA North (USA-Canada-Mexico)

Price : On request

hlmann Thermoforming Blister machine designed to handle 12 and 28 mm draw depths at 15-50 strokes/minute, with Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Standard stroke is 25 mm x 100 mm x 13 mm depth adjustible drive, pre-heating, forning and sealing stations wi Location : AMERICA North (USA-Canada-Mexico)

Price : On request

PE, ACLAR and ALU/ALU forming material flood or hand feeding system with plug assist, vision system with Coolf Year(s) : 1995 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

CLOSE TO 3 SETS OF TOOLING. MAX. MATERIAL WIDTH 165MM. ONE SIDE DEEP DRAW PLASTIC 100-250 MY. ONE SIDE COATED Year(s) : 1987 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Location : AMERICA North (USA-Canada-Mexico)

Price : On request

480 volt 60 cycle Year(s) : 1985 Location : AMERICA North (USA-Canada-Mexico)

Price : On request