Used Downstream extrusion

7" x 60" Dual up Kiwex Belt Puller (2) 7" wide x 60" Long Belts, Belt Centerlines 13.5" Apart (2) 3kw Motors w Year(s) : 2018 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Having 4 ¼”wide belts with x 21″ long contact area. Belts driven by approximately a 2 HP 230/460-Volt A/C mot Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Nominal 18″ saw blade. Up acting cut with pneumatic hold downs Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Set up for right to left operation. Manufactured in 1992. Includes portable dust collector. Year(s) : 1992 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Utilizes nominal 9 1/4″ wide cleats with 108″ belt contact length. Chain driven with dual pneumatic gap adju Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Set up for 9 1/4″ wide cleats with 120″ belt contact length. Chain driven with dual pneumatic gap adjustment. Year(s) : 1992 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Planetary saw for pipes 63-400mm Location : EUROPE (Western and Northern)

Price : On request

Set up for 9 ” wide cleats, which are missing. 96″ belt contact length. Chain driven with dual pneumatic gap Location : AMERICA North (USA-Canada-Mexico)

Price : On request

4-crawler haul-off for pipes from D=63mm to D=315mm Location : EUROPE (Western and Northern)

Price : On request

Vacuum spray tank 6m for pipe up to D=400mm Cooling spray tank 6m for pipe up to D=400mm Spray tank must be Location : EUROPE (Western and Northern)

Price : On request

9″ wide cleats with 96″ belt contact length. Chain driven with dual pneumatic gap adjustment. Air traveling Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Has nominal 4″ wide belts with 28″ of contact length. Gap is manually adjustable via hand wheel on top belt. Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Cutting Blade 16" Diameter Travel 18" O.D. Capacity 4-1/2" Cut Length 25" Horsepower 1 HP Voltage 480V / 3 Pha Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Downstream Equipment For HDPE Lumber 80" L Primary Cooling Tank, 12" x 12" Cross Section, 2 Recirculation Pum Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Cooling spray bath 3 m Suitable for pipes up to 50 mm OD Year: approx. 2018 Year(s) : 2018 Location : EUROPE (Western and Northern)

Price : On request

Cutter for corrugated pipes from 7 – 60 mm Year(s) : 2015 Location : EUROPE (Western and Northern)

Price : On request

Manual belling machine for pipes up to 200 mm Year(s) : 2008 Location : EUROPE (Western and Northern)

Price : On request

4" x 36" Youngstown Puller 1 Hp DC Motor Screw Jack Raise and Lower Feet Per Minute Readout, Speed Pot 32" x Year(s) : 1993 Location : AMERICA North (USA-Canada-Mexico)

Price : On request