Used Food Processor

Type FMF 500 / - 150 x 2.300 nett width 500 mm dimensions: ± 3.000 x 800 x 1.200 mm aluminum step: Location : EUROPE (Western and Northern)

Price : On request

PRODUCT SUPPLY BUNKER + ELEVATING SPIRAL SCREW with hopper ± 2.000L with driven shafts with fingers to separ Location : EUROPE (Western and Northern)

Price : On request

3 ph, 75Kw @ 1440 RPM, 415V electric motor and has a 30Kw @ 1483 RPM 415V back drive, stainless steel max dens Location : OCEANIA

Price : On request

Power 298 kW gas burner 3 x 400V, 50 Hz dimensions (l x w x h ) : ± 1.700 x 1.200 x 2.200 mm +Pump Location : EUROPE (Western and Northern)

Price : On request

Suitable for nitrogen all stainless steel belt width ± 1.220 mm nett belt length 8.000 mm dimensions (l x w x Location : EUROPE (Western and Northern)

Price : On request

in very good condition completely overhauled all stainless steel hopper capacity 270L die width 400 mm usable Location : EUROPE (Western and Northern)

Price : On request

Berief Jumbo KODUKO 16/500 Drum Blancher In very good condition continuous blanching / pasteurizing / coo Location : EUROPE (Western and Northern)

Price : On request

Height 1520 Width 1100 mm Length 1700 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel Location : EUROPE (Central and Eastern)

Price : On request

Willmes 40 HL UP 4000 pneumatic press Location : EUROPE (Western and Northern)

Price : On request

CAPACITY HL 16, OPEN CYLINDER Entirely constructed in AISI 304 stainless steel Must collection tray Door with Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

Height 1300 Width 700 mm Length 1650 mm Main material Stainlees Steel Chamber dimentions 470x80x80 mm Air Location : EUROPE (Central and Eastern)

Price : On request

Capacity 3000 kg/h This unit has been thoroughly checked, cleaned and tested, ensuring it is in perfect workin Location : EUROPE (Western and Northern)

Price : On request

The machine after capital renovation. All bearings and sealings in this machine are new. New belts, hooks, fun Year(s) : 2017 Location : -

Price : On request

Ready to work For the 24 mm to 90 mm calibre range. 200 cycles/min All bearings, bushings and rollers new. New Location : -

Price : On request

After capital renovation 3 months warranty for parts. For the 24 mm to 120 mm calibre range. 200 cycles/min Al Year(s) : 2018 Location : -

Price : On request

After capital renovation 3 months warranty for parts. For the 38 mm to 150 mm calibre range. 156 cycles/min Al Year(s) : 2020 Location : -

Price : On request

Drive: 2x out-of-balance drive Material: stainless steel Dimensions of shaker bed: approx. 2100x2100mm Year(s) : 2013 Location : EUROPE (Western and Northern)

Price : On request

Drive: 2x out-of-balance drive 230 / 400V, 50hz Width (internal shakerbed): 1.200mm Length (functional shakerb Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

Height 2000 Width 550 mm Length 1650 mm Voltage Electrical: 400V 50Hz 3N Installed Power 2,5 kw Main mate Location : EUROPE (Central and Eastern)

Price : On request

Power: 2.8 kW Power supply: 3 × 400 V Frequency: 50 Hz Calibre range: up to 200 mm Capacity: up to 60 cycles/m Location : EUROPE (Central and Eastern)

Price : On request

Location : AMERICA North (USA-Canada-Mexico)

Price : On request

208 volts, 10 amps Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Calibre 13 - 38 mm Pipe set Calibre 38 & 25 Steam 140 - 260 kg/h, @2 Bar Compressed air 5 - 7 Bar Power 3 x 38 Year(s) : 1998 Location : EUROPE (Western and Northern)

Price : On request

Belt driven by drumdrive Pressure rollers driven by shaft-mounted gearmotor Belt type: mesh Belt width: 700mm Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

Incline Conveyor and Gantry Incline Auger Conveyor with Gantry and Infeed hopper. Infeed Height: 930mm Interna Location : EUROPE (Western and Northern)

Price : On request