Used Granulator / Hopper Loaders / Silo

Weight: 1020 lbs 1500 lb Capacity 38" Inside Diameter 10" x 10" Flange 9" Holes Center to Center 6" Opening 8"... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Weight: 580 lbs 735 lb Approx. Capacity 58" Cylinder Height 17" Cone Height 12" Top Opening 35" Outside Diamet... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Drying Hopper w/ Shutoff Weight: 630 lbs 735 lb Approx. Capacity 57.5" Approx. Cylinder Height 17" Approx. Con... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Tested Good Weight: 600 lbs 10" x 12" Throat Size 7.5 HP 3 Blade Closed Rotor 3/16" Screen Hole Size 230 Volt... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Capacity: 90KW Width: 600 Rotor width: 1000 Hydraulically hinged housing with 3 stator knives: Overhauled, pr... Location : EUROPE (Western and Northern)

Price : On request

Low-Speed Type Granulator 30 RPM 3/4 HP 230/460V Year(s) : 2009 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Low-Speed Type Granulator 28 RPM, 2 HP, 230/460V, 3PH Year(s) : 2015 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Low-Speed Type Granulator 28 RPM, 2 HP, 230/460V, 3PH Motor Disconnected Year(s) : 2015 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

24" x 40" X1000 5 Knife Open Rotor 2 Bed Knives 100 HP AC Motor -114 amp Includes Starter Panel Blower/Cyclone... Year(s) : 1994 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Rotor diameter 45 - 80 cm Output Approx. (Depending on screen size) 800 Kg/Hour Motor 37 kw Dimensions (LxWxH)... Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

Horsepower: 120 HP 5 Fly Knife Open Rotor 3 Bed Knifes 17″ Rotor Diameter 120HP Motor 1785 RPM 460/3/60 – 137... Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Cutting mill for processing film waste Drive: 110 kW with roller feed type EB 980 from technical center (machi... Year(s) : 2011 Location : EUROPE (Western and Northern)

Price : On request

Granulator with compact noise protection Drive 30 kW Working width 600 mm Rotor diameter 450 mm with electroni... Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

Cutting mill designed for processing thin foils with maximum throughput Drive 250 kW Foil shredding via roller... Year(s) : 2020 Location : EUROPE (Western and Northern)

Price : On request

400mm Wide With Fan And Powered Nip Rolls. Seperate Control Panel Location : EUROPE (Western and Northern)

Price : On request

Granulator machine with rotor length 900 mm x diam. 450 mm and output up to 1 tone. Rotor: Length 900 mm x dia... Location : EUROPE (Western and Northern)

Price : On request

Feed throat: 24″ x 40″ Number of stationary blades: two (2) Rotor: 3 blade Blower 15 HP Approx Throughput... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Complete System – Installed and Operational Voltage: 460V PFV200/15 Agglomerator Knife Mill Model PSP 400×500... Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

24" x 40" 5 Knife Open Rotor, 2 Bed Knives 125 HP AC Motor Includes Starter Panel Blower/Cyclone with Kongski... Year(s) : 1993 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

12" x 20" Granulator 30 Hp (230/460v motor) 3 Knife Closed Rotor, "micro knife blades" 1/4" Screen, Hard Faced... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

8" x 19" Granulator 12 Knife Staggerd Rotor Design, 10HP 1/4" Screen Size, 2" Takeoff 37" x 53" x 60" Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Weight: 630 lbs 735 lb Approx. Capacity 58" Cylinder Height 17" Cone Height 12" Top Opening 12" Flange 6.75" x... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Weight: 230 lbs Filterless 24 Volts 1 F.L. Amps 60 Hz Single Phase Revision: BAAN 24" Cylinder Height 25" Cone... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Weight: 630 lbs 735 lb Approx. Capacity 58" Height 17" Cone Height 12" Top Opening 12" Flange 6.75" x 6" Holes... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

600x450mm Throat opening Motor: 37kw 6 fly blades 2 fixed blades Open Rotor Sound Proofed Location : EUROPE (Western and Northern)

Price : On request