Used Injection/Blow Molding and Forming machine
4,504 resultsSubcategories
Shot Size 42.9 oz. Clamp Type Rotary Clamp Style Vertical Daylight Max 16" Table Size 47" Injection Orien Year(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsClamp Force: 176 US Tons Shot Size: 4.6 Oz/35 mm Platen Size: 56.2" x 26.5" Tie Bar Spacing: 47.4" x 14.7" Year(s) : 2020 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details# of Arms 2 Arm Type Offset Swing 144" BTU 5,000,000 Note Machine is a Shuttle Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details2 - Each Uniloy Milacron Dual Shuttle Blow Molder, 2010 & 2018, Single PE Processing Heads, Hot Knife, Parison Year(s) : 2010 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsHayssen #6065 Blow Molder, Single Shuttle, Vertical Extruder, 3x125 PE Processing Head, Parison Programming, G Year(s) : 1989 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsUniloy 350R2, 6-Heads 8" Centers, 125-Hp. AC Drive, Air Cooled Barrel, Part Picking Arm & Fingers, Hopper Draw Year(s) : 1990 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsHartig Blow Molder, Model #2403-RS, 3" 24:1 Reciprocating Extruder Screw, Dual Heads 12" Centers, Platen 24" Year(s) : 1989 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details2005 Bekum BM-705D Dual Shuttle Blow Molder, In-Machine Trim, 5X100 PE Processing Head, With Head Tooling, Blo Year(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsToshiba EC-610-SXV50-61B, All Electric Injection Molding Machine, Shot Size 124-oz., Run Hours 56,273, Manuals Year(s) : 2013 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsTechne 20000, Single Forward Shuttle With In-Machine Trim, Dual 330-mm PE Processing, Capable Of Producing, Du Year(s) : 1992 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsDual Shuttle, 2x85mm PE Processing Head, Hunkar 311 Parison Programmer, 60mm 24:1 Extruder, 30-Hp. AC Baldor D Year(s) : 1981 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsDual Shuttle, 90mm 24:1 Extruder, 60-Hp. DC Drive, Bekum Machine Controls, Good Condition. Year(s) : 1984 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsAutoma Plus AT-5 Triple 125 PE Processing Head 70-mm Air Cooled Extruder Single Shuttle Bottle Takeout Automat Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsShot Size 62.3 oz. Platen Size 50" x 47.24" Tie Bar 35.43" x 35.43" Daylight Max 64.96" HKO Yes Corepull Year(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsDistance between tie-bars (h x v) 360 x 320 mm Ejector force 5 / 20 (2.0tonf) / 70 kN Injection volume 24 cm³ Year(s) : 2019 Location : EUROPE (Western and Northern)
Price : On request
More detailsHours 1793 Max Forming Area 45 x x93" (Sheet Size 48 x 96") Form Station Stroke 23" Lower Platen Drive Type Year(s) : 2019 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsControl Type: CC200 Type of control: CC200 Number of hours: 9000 H Closing Closing force: 40T Opening stroke: Year(s) : 2002 Location : EUROPE (Western and Northern)
Price : On request
More details30'' x 30'' forming area Top and bottom calrod heat Servo index Microprocessor controls Year(s) : 1989 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsMaximum Forming Area 120" x 120" Heat Source Open Coil Top & Bottom Ovens Yes # of Top Zones 15 # of Bottom Zo Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsUse from 2006 to 2012 exclusively for thermoforming glass vanity tops Forced ventilation / cooling system Oven Year(s) : 2006 Location : EUROPE (Western and Northern)
Price : On request
More detailsWeight: 29000 lbs Vertical Clamp 300 Ton 21.5 Oz Shot Size Pathfinder 5000 Control Toggle Clamp 26.25" x 22.25 Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsShot Size 32 oz / 20 oz Screw Diameter 65mm – 55mm L/D Ratio 25:1 Tie Bar Spacing 28.90″ x 28.90″ Mold Thi Year(s) : 2007 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsDr.Boy 22M Injection Moulding machine All of them are Procan control and in perfect running condition. Location : ASIA (South)
Price : On request
More detailsDr.Boy 50m Injection Moulding Machine for sale in perfect running condition. Year(s) : 10 Location : ASIA (South)
Price : On request
More detailsMax speed : 14.000 bph Current size (ml) : 1000 ml Container material : PET Number of moulds : 10 Number of gr Year(s) : 1999 Location : EUROPE (Western and Northern)
Price : On request
More detailsYou can find used Injection/Blow Molding and Forming machine on Wotol
For second hand Injection/Blow Molding and Forming machine we have Injection Molding up to 100T, Injection Molding 100T to 300T, Injection Molding 300T and above, Thermo forming, Vacuum forming, Complete Injection Molding Line, Blow molding, Robots. The main manufacturers for used Injection/Blow Molding and Forming machine are Engel, Arburg, Krauss Maffei, Nissei, Van Dorn, Battenfeld, Demag, Toshiba, Cincinnati, Husky, Haitian, Illig, Sumitomo, Boy.
The main models are ISG120N, FN Series, ISG250NV10-10A, EC Series, LGH500N, VE900/210, ES Series.
.