Used Injection/Blow Molding and Forming machine
4,315 resultsSubcategories
STD O/P PER HR – 1920 RATED POWER - 86 KW CLAMPING FORCE – 250 TON CLAMP CLOSE MIN/MAX - 250/575 NO OF HEAD – Year(s) : 2004 Location : EUROPE (Western and Northern)
Price : On request
More detailsSTD O/P PER HR - 9500 RATED POWER - 184 KW CLAMPING TONNAGE - 90 TONES CLAMP CLOSE MIN/MAX - 6,0”/11,8” OPENIN Year(s) : 2004 Location : EUROPE (Western and Northern)
Price : On request
More detailsSpecifications * Unwind Stand * Indramat Servomotor Indexing * Top & Bottom Heaters, total Capacity 73.9 kW * Year(s) : 2000 Location : EUROPE (Western and Northern)
Price : On request
More detailsType: Continuous Extrusion Head: Large Single Parison Programming: Yes Extruder: 60mm Primary With two 30mm ex Year(s) : 1983 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsProduction up to 16.000bph in the format 2000ml. overhauled and guaranteed Year(s) : 2000 Location : EUROPE (Western and Northern)
Price : On request
More detailsDual Accumulator Head Blow Molding Machine – Head configuration-dual 25-pound heads – Shot size- 25 pounds – H Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsControl Type: CC100 Number of hours: 42,500 Closing Closing force: 45T Opening stroke: 400 mm Between columns Year(s) : 2005 Location : EUROPE (Western and Northern)
Price : On request
More detailsContinuous Extrusion Head: Dual 330mm PE Parison Programming: 100 Point Maco Extruder: 90mm, 24:1 L/D Air Cool Year(s) : 1992 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsPET bottles blowing machine Year(s) : 2003 Location : EUROPE (Western and Northern)
Price : On request
More detailshead size: dual 330mm programming: 100 points extruder: 90mm, 24:1, air-cooled controls: Maco 6000 series moto Year(s) : 1992 Location : EUROPE (Western and Northern)
Price : On request
More detailsNumber of Axis 6 Rotational Wrist No Pneumatic Option No Teach Pendant No X-Servo No Z-Servo No Y-Servo Year(s) : 1995 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsINJECTION UNIT : Screw diameter: 70 mm Calculated injection volume: 853 cm³ Pressure on the material: 1400 b Year(s) : 2001 Location : EUROPE (Western and Northern)
Price : On request
More detailsCartesian robot Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 Year(s) : 2005 Location : EUROPE (Western and Northern)
Price : On request
More detailsScrew diameter: 72mm. Tie bar spacing: 710x710mm Machine is in good working condition Year(s) : 2002 Location : ASIA (China - Taiwan - HKG)
Price : On request
More detailsINJECTION UNIT : Screw diameter: 30 mm Year(s) : 1999 Location : EUROPE (Western and Northern)
Price : On request
More details24″ center head spacing 2000 gram (4.18 pound) shot size capacity, 46.5″ x 20″ clear platen size, 12″ minimum Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsPLASTIC BOTTLES, 1000 BOTTLES/HR 2-Cavity to 6-Cavity with a capacity of up to 1,000 500ml bottles per hour. C Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsBlow molding Machine – Bottle wall configuration- Mono layer – Extruder configuration- Single extruder – Extr Year(s) : 2008 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsType: Reciprocating Head: 5 on 6-1/8 Inch centers Parison Programming: No Extruder: 3.5 Inch Controls: Origina Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsType: Reciprocating Head: 8 heads on 6-1/8 Inch centers Parison Programming: None Extruder: 3.5 Inch Controls: Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsX-axis: 500 mm Y-axis : 800 mm Z-axis: 4.280 mm Only approx. 13.000 working hours Year(s) : 2010 Location : EUROPE (Western and Northern)
Price : On request
More detailsOnly approx. 13.000 working hours X-axis: 500 mm Y-axis 800 mm Z-axis 3.320 mm Year(s) : 2010 Location : EUROPE (Western and Northern)
Price : On request
More detailsThermoforming machine. 44" x 40" forming area 6" draw 200" ovens top and bottom. 44" wide Lyle Horizontal trim Year(s) : 2005 Location : EUROPE (Western and Northern)
Price : On request
More details520x400mm Auto Pressure/ Vacuum Former With Steel Rule Cut In Place Stacker And Waste Rewind Ps,eps,pp,pe,pvc, Year(s) : 1996 Location : EUROPE (Western and Northern)
Price : On request
More details(3) Head Blow Molding Machine – Head configuration- (3) heads with 14 1/2” center to center distances between Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsYou can find used Injection/Blow Molding and Forming machine on Wotol
For second hand Injection/Blow Molding and Forming machine we have Injection Molding up to 100T, Injection Molding 100T to 300T, Injection Molding 300T and above, Thermo forming, Vacuum forming, Complete Injection Molding Line, Blow molding, Robots. The main manufacturers for used Injection/Blow Molding and Forming machine are Engel, Arburg, Krauss Maffei, Nissei, Van Dorn, Battenfeld, Demag, Toshiba, Cincinnati, Husky, Haitian, Illig, Sumitomo, Boy.
The main models are ISG120N, FN Series, ISG250NV10-10A, EC Series, LGH500N, VE900/210, ES Series.
.