Used Knotting - Drawing in / Beam carriers / Batching / punching machines / others auxilliaries
279 resultsPaternoster / Beam storage 4 units are exactly the same. Max beam dia 1000 Max width of beams 250/260cm Location : EUROPE (Central and Eastern)
Price : On request
More detailsLocation : EUROPE (Western and Northern)
Price : On request
More detailsLocation : EUROPE (Western and Northern)
Price : On request
More detailswidth 230 cm with 2 trolleys type HVD-200 for 20 shafts with possibility to increase to 28 shafts for J and C Year(s) : 1994 Location : EUROPE (Western and Northern)
Price : On request
More detailsYear(s) : 1996 Location : EUROPE (Central and Eastern)
Price : On request
More detailswithout inspection for looms in ww 2100mm only the rolling device marked inside the yellow lines the inspect Year(s) : 2002 Location : EUROPE (Western and Northern)
Price : On request
More detailsWorking width 5400 mm DIN Warp beams T540 DIN tube dia 270mm total length 576,5cm (3.5cm + 569,5cm + 3,5cm) w Location : EUROPE (Western and Northern)
Price : On request
More detailsThe machine works with cross in the warp and is predesignated for courser yarns. Without box trolley and trans Location : EUROPE (Western and Northern)
Price : On request
More details2 x Uster Topmatic TPM and other TPM PC With 1 trolley each mm. 2200 Year 1995, 1996 Nice condition Year(s) : 1995, 1996 Location : EUROPE (Central and Eastern)
Price : On request
More detailswith 2 trolleys J and C type max. 28 heald frames (24 installed) drawing speed 165/min. 1 or 2 beams/sheets wi Year(s) : 2013 Location : EUROPE (Western and Northern)
Price : On request
More detailsEE-KHUR modified to optionally carry Picanol QSC devices Upgraded for the transportation and loading of QSC-u Location : EUROPE (Western and Northern)
Price : On request
More detailsØ batching max 1500 mm, tension 230V 50/60 Hz, 650 VA, working width 2200mm BUT THE TOTAL LENGTH OF THE ROLLS Location : EUROPE (Western and Northern)
Price : On request
More detailsFrom roll to roll, width adjustable from 100 cm up to 540 cm Let off unit type ARL / 5400-1800, max width 540 Year(s) : 2008 Location : EUROPE (Western and Northern)
Price : On request
More detailsTITAN Reed drawing in machine BE2 with trolley BS2-B width 2000 mm. Left to right. Location : EUROPE (Western and Northern)
Price : On request
More detailswith frame length 2400 mm. Year(s) : 1988, 1990 Location : EUROPE (Central and Eastern)
Price : On request
More detailsHYDRAULIC LIFT, LOAD CAPACITY 2.500 KG. Year(s) : 2001 Location : EUROPE (Western and Northern)
Price : On request
More detailsHYDRAULIC LIFT, LOAD CAPACITY 1.000 KG. Year(s) : 1998 Location : EUROPE (Western and Northern)
Price : On request
More detailsMAX LOAD CAPACITY 1.000 KG. Year(s) : 1992 Location : EUROPE (Western and Northern)
Price : On request
More detailsLocation : EUROPE (Central and Eastern)
Price : On request
More detailsJ and C type headles can be drawn. 230 cm width. Year(s) : 2016 Location : MIDDLE EAST
Price : On request
More detailsAUTOMATIC DRAWING IN MACHINE WIDTH 400 cm MAX SPEED 200 RPM CAPACITY 20 FRAMES CAPACITY OF THE WARP STOP MOTI Year(s) : 1993 Location : EUROPE (Western and Northern)
Price : On request
More details230 cm working width double stand running situation. Year(s) : 1991 Location : MIDDLE EAST
Price : On request
More details280 cm working width running situation. Location : MIDDLE EAST
Price : On request
More detailsBRAND NEW, NEVER USED The Smartknot automatic warp knotting machine, type TM-2, is compatible with Fischer-Po Location : EUROPE (Western and Northern)
Price : On request
More detailsCYLINDER WIDTH: 2,80 cm MACHINE WIDTH: 3,05 cm Location : MIDDLE EAST
Price : On request
More detailsYou can find used Knotting - Drawing in / Beam carriers / Batching / punching machines / others auxilliaries on Wotol
The knotting machines will be used for linking the end of a finsihed warp to an full warp. Knotting was done manually with special knot. Although skillful knoting technician can be very fast it is a fastidious work that can take more than one day to perform.
Drawing in machine will be used to pass the warp yarns theough the headles holes. Like knotting it was done manually by skilful technician until the drawing machines were intorduced on the market in the 80s. Now you will find fully automated drawing in machines.
Batching motions are used to replace the cloth rolller system in case you need to roll big rolls. Also for technical fabric you will use tangential batching motion and other types.
Beam carriers are used to carry the beams from the warping machine on the loom.
You will find in general all auxiliary machines used in a weaving mill.
FAQ corner - questions and asnwers from members
Q: I have a single knot knottng machine but I need to make double knot. Is it possible to modify.
A: For double know you should use doubke knot knotting machine. This is more diffuclt to find used double knot knotting machines and prices are hight than singke knot ones.
Q: Are there drawing in machines suitable for both C and J type?
A: Yes the latest generation of drawing in machines can handle both J and C type.
Q: I have been offred a very nice Knotex TSE BT03 that was used to tie single knot plast thread 1100 dtex. Is it suitable for discontinuous mixed viscose NM 15/2 et NM 28/2?
A: In order to use your yarns you should change the Kotex needles and we recommend you to have a Groz Beckert technician to adjust the machine for you..