Used Plastic Machinery

14″ x 24″ feed throat. 5 knife open rotor with 3 bed knives. 25 HP 460-volt 1800 RPM drive motor. Pre-cut t Location : AMERICA North (USA-Canada-Mexico)

Price : On request

“Granumatic” single shaft shredder. 84 knife 17.08″ OD x 63.77″ wide 58 RPM rotor. Powered by a 75 HP 400/3/ Year(s) : 2010 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

24″ x 42″ feed throat. 20 knife hog rotor. 3 bed knives. Dual flywheels. Conveyor in-feed hopper with pneuma Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Shot size: 42.9 Ounces. Screw size: 80 mm Tie bar spacing: 28.9" x 28.9" Platen Size: 41.5" x 41.5" Max. Open Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

All electric Double Toggle Injection molding machine Shot size: 43.7 Oz. Tie bar spacing: 35.43” x 31.87” Plat Year(s) : 2020 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Shot size: 65.1 Oz Screw size: 85 mm Tie bar spacing: 40.15" x 40.15" Platen Size: 56.7" x 58.3" Max. Open day Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Steering: CC200 Operating hours: 24896 hours Technical data closing side Closing force: 1300 kN Plate size hx Year(s) : 2008 Location : EUROPE (Western and Northern)

Price : On request

Operating hours: 10624 h Technical data, closing side Closing force: 1200 kN Plate size h x v: 710 x 400 mm I Year(s) : 2012 Location : EUROPE (Western and Northern)

Price : On request

SHOT SIZE 36.5 oz. PLATEN SIZE 51.96" x 52.36" DBTB 40.15" x 36.22" HKO Yes CORE PULL Yes MAX MOLD SIZE 53.15" Year(s) : 2014 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Dahbah ABM-53SPZ pouch bagmaking machine Type of bag : Stund up pouch with zipper 3 side seal with zipper Min- Year(s) : 2006 Location : EUROPE (Western and Northern)

Price : On request

1997 Alpine 75mm extruder 125 hp motor no drive or control cabinet 150 mm alpine rotating die and airing are a Year(s) : 1997 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Shot size: 111.6 Oz Screw size: 100mm Tie bar spacing: 40.15" x 40.15" Platen Size: 56.7" x 58.3" Max. Open da Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2 Color Plastic Injection Molding machine: Wide platen Rotary Platen. Shot size primary barrel: 37.67 Oz Shot Year(s) : 2012 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Two Platen Servo Primary Shot Size: 82 Oz. Tie Bar Spacing: 35.83" x 35.83" Platen Size: 51.57" x 51.57" Contr Year(s) : 2020 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Nominal capacity range 850-1250kg/hr depending on feed material, currently with 8505 run hours consisting of Year(s) : 2018 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3 1/2” Extruder 32:1 L.D. Gear Box Ratio: 15.12.1 100 H.P. D.C. Motor and Drive. Vented and Plugged. Water Coo Year(s) : 1988 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1″ Pedestal 30:1 Air Cooled Extruder 8 Eurotherm # 2216 Controllers Previously used as a co-extruder on a shee Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1.25″ Pedestal Extruder 24:1 – 5.4 HP AC Motor Air Cooled Electrically heated barrel Non-Vented Control – Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Total Rebuild 3/4” 24:1 Extruder A.Rebuilt Gearbox. B. New Belts. C. New Barrel. D. New Heater Bands & Blowers Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Lab use only 8 1/2” Wide X 6” Diameter Air Knife with Blower Winder 1/4 H.P. D.C. Drive 10 Amp 220 Volt Single Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Reconditioned 1” 24:1 Merit-Davis Post Extruder 3 Barrel Zones 1 Adapter 2 Die- Air Cooled. Melt Temp. Melt P Location : AMERICA North (USA-Canada-Mexico)

Price : On request

31/2” 30:1 100 Hp DC Screen changer Gear pump Was set up to run cast film Water Cooled Location : AMERICA North (USA-Canada-Mexico)

Price : On request