Used Plastic Machinery

Tonnage range 501 – 800 tons Tonnage 750 Ton Shot Size (Oz) 264 Oz Screw Diameter 135 mm Tie Bar Spacing 45” x Year(s) : 1998 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

6" Gloucester Extrusion Line With Nordson WRP12V Water Ring Pelletizer 6" Gloucester Single Screw Extruder, 3 Year(s) : 1990 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

65mm Twin Screw Extruder, 50hp 50hp Allen Brandley AC Motor, Milacron Gearbox with 59.1 Gearbox Ratio 4 Barre Year(s) : 2009 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Shot Size 21.3 oz Platen Size 44.5" x 40.6" Tie Bar Spacing 31.9" x 28" Daylight 49.21" Stroke 23.62" Controls Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Mold Depth 2 x 130mm Work Station Double Control New Direct Logic PLC with New 10” Touch Screen Terminal. Temp Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Brand LMG Screw Diameter 32mm Screw L/D 20:1 Max Shot Capacity 4" Platen Size 14" x 18" Tie Bar Spacing 14" x Year(s) : 2014 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Horse power- 140 horse power Cutting circle size- 24″ x 40″ Hydraulic hopper opening system Number of rotor k Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Throughput- up to 600 pounds per hour Horse power- 15 Feed throat opening- 12″ x 14″ Cutting chamber- 12″ Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Horse power- 25 Cutting chamber- 14” x 18” Rotor type- open tangential Rotor knives- 3 Bed knives- 2 Offer i Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2″ Scheer Model SGS-50-EL strand pelletizer Nominal 2″ wide entrance. Has 20 knife carbide inlay helical styl Year(s) : 2013 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

12″ x 15″ feed throat 3 knife solid rotor 2 bed knife 20 HP 230/460-volt motor Double wall tray / robot feed h Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2 HP cutter with four (4) blade hub three (3) spare dies 40 GPM TWS-40 water system with heater pump heater ex Location : AMERICA North (USA-Canada-Mexico)

Price : On request

30:1 L/D air cooled non-vented barrel at a 23.5″ centerline Powered by a 40 HP 230/460-volt A/C motor with Tec Location : AMERICA North (USA-Canada-Mexico)

Price : On request

32:1 L/D With an electrically heated Water cooled (closed loop) vented Plugged barrel at approximately a 72″ Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Incomplete CDL model UWP36620 underwater pelletizing system. Includes 20 HP cutter less cutting hub 48 hole Location : AMERICA North (USA-Canada-Mexico)

Price : On request

4″ wide Scheer Bay pelletizer 460 volt A/C input 3 phase 60 hertz 14.2 amps Has 32 knife carbide inlay helica Location : AMERICA North (USA-Canada-Mexico)

Price : On request

2.5″ extruder, 32:1 L/D five (5) zone air cooled and vented barrel at a 45″ centerline height. Top center feed Location : AMERICA North (USA-Canada-Mexico)

Price : On request

24″ x 42″ feed throat 27 knife hog rotor 3 bed knife 100 HP 220/440-volt motor Pneumatically assisted tilt bac Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Model Thermatic 150 1.5″ extruder 34:1 L/D barrel having a five (5) zone electrically heated Air cooled, and n Location : AMERICA North (USA-Canada-Mexico)

Price : On request

36 knife helical rotor Hypalon rolls 15HP 460V motor arranged through a manual variable drive no controls Location : AMERICA North (USA-Canada-Mexico)

Price : On request

24″ x 42″ feed throat 5 knife rotor with knife carriers 3 bed knife 100 HP 230/460V 1765 RPM motor Dual flywhe Location : AMERICA North (USA-Canada-Mexico)

Price : On request

One (1) used 1.5″ 20:1 L/D ratio Davis Standard rubber extruder with powered feed roll on throat. Barrel is el Location : AMERICA North (USA-Canada-Mexico)

Price : On request

12″ x 15″ feed throat 3 knife solid rotor 2 bed knife 20 HP 230/460-volt motor insulated tray feed hopper and Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Injection Molding Machine Clamp (Tons) 50 Year 2007 Year(s) : 2007 Location : ASIA (South East)

Price : On request

Working capacity 22-25 litre Approx total volume of trough litres: 32 litre with Hasco Hydraulics Ltd power pa Year(s) : 1989 Location : EUROPE (Western and Northern)

Price : On request