Used Plastic Machinery
10,390 resultsFind by category
Type of Thermoformer: Single Station Thick Gauge / Cut-Sheet Machine Max Mold Size: 28" x 28" Top Oven: Calrod Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details10" x 50" Conair/Metaplast Cleated Puller AC Individually Driven Belts (2) 2hp AC Motors, 1750-6000rpm / 94.35 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsTie bar spacing: 560mm. Screw diameter: 50/55mm. A few units . Good working condition. Location : ASIA (China - Taiwan - HKG)
Price : On request
More detailsMachine hours 23.710 hours Power consumption 70 A Connected load 46 Kw Dry air quantity 800 m³/h Heating power Year(s) : 1990 Location : EUROPE (Western and Northern)
Price : On request
More detailsSafety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year(s) : 2010 Location : EUROPE (Western and Northern)
Price : On request
More detailsRoller Feed LD ratio 15:1 Year(s) : 1993 Location : EUROPE (Western and Northern)
Price : On request
More detailsCooling tank length 3 m. Diam max 125mm Made inox steel Water pump 1,5 kw Location : EUROPE (Western and Northern)
Price : On request
More detailsVacuum tank Brand Amut Location : EUROPE (Western and Northern)
Price : On request
More detailsCutting unit Brand Baruffaldi Location : EUROPE (Western and Northern)
Price : On request
More details2" Davis Standard Extruder 24:1 L/D, Air Cooled 3 Barrel Zones, 3 Die Zones, Amp Meter, Pressure Gauge, RPM Ga Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsModel: CLF-180T. Good working condition. Location : ASIA (China - Taiwan - HKG)
Price : On request
More detailsVertical Injection Molding Machine. Rotary Table Diameter: 880mm Screw diameter: 28mm. Machine has rotary tabl Year(s) : 2014 Location : ASIA (China - Taiwan - HKG)
Price : On request
More detailsMachine is two colored. It can make 2L products. Machine has two new inverters, new PLC. Very good working Location : ASIA (China - Taiwan - HKG)
Price : On request
More details150ton 3400mm wide Upstroking 3x heating zones Eurotherm controllers Location : EUROPE (Western and Northern)
Price : On request
More details24:1 L/D AIR COOLED ELECTRICALLY HEATED BARREL WITH A 42″ TO 44 3/4″ ADJUSTABLE CENTERLINE, DRIVEN BY A 10 HP Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsWorking width: 2600mm Maximum roll diameter at unwinding: 800mm Speed: maximum 100 m/min Materials: films, use Year(s) : 1996 Location : EUROPE (Western and Northern)
Price : On request
More detailsSpeed: 2200 Bph Cavities: 6 Compressor: Atlas Copco 08 Bottle formats: 3 cl up to 500 ml Preform loader Year(s) : 1990 Location : EUROPE (Western and Northern)
Price : On request
More detailsGravimetries Type: Somos BB-150 Year(s) : 2013, 2014 Location : EUROPE (Western and Northern)
Price : On request
More detailsManufacturer: Walbro Water bath 5 m Year(s) : 1987 Location : EUROPE (Western and Northern)
Price : On request
More details2 pieces Alu-tape uncoiler With tape storage Year(s) : 2008 Location : EUROPE (Western and Northern)
Price : On request
More detailsPunching machine for PE pipes up to 160 mm Year(s) : 1980 Location : EUROPE (Western and Northern)
Price : On request
More details4 pieces Punching machines for pipes up to 100 mm and up to 160 mm Year(s) : 1977, 1978 Location : EUROPE (Western and Northern)
Price : On request
More detailsHaul-off Caterpiller150 x 1000 Manufacturer: Maerdian Type:150x1000 Year: 2011 Only 50 working hours Year(s) : 2011 Location : EUROPE (Western and Northern)
Price : On request
More detailsShot Size 33.8 oz. Platen Size 41.5" x 41.5" Tie Bar 28.9" x 28.9" Daylight Max 52" HKO Yes Corepull Yes Year(s) : 1997 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsCE Marked Roll size (working): 450mm Ø x 1200mm wide Material batch size: 50kg Roll Type: Front roll periphera Location : EUROPE (Western and Northern)
Price : On request
More detailsPlastics are polymerization products that can be formed into various shapes as needed when given pressure and heat.
There are also machines used to process plastics starting from plastic ore are: Single / twin screw extruder.
Machines used to mold plastics into a variety of common forms: injection molding, thermofoming, blow molding, etc.
Machines used to process plastics into special shapes: blown film, cast film, pipes and many more.
Majors brands such as Engel, Arburg, Krauss Maffei, Battenfeld, Demag, Nissei, Cincinnati, etc