Used Plastic Machinery

3.5″30:1 HPM extruder having an electrically heated water cooled (closed loop) vented and plugged barrel at a Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Oz 8 Type of Control Injectvisior V-10 Between Tie Bars 20" x 22" Platen Size 29" x 31" Clamp Style Hydraulic Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Oz 9.5 Type of Control EC100 Between Tie Bars Tiebarless Platen Size 27.60" x 27.60" Clamp Style Hydraulic Ma Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Brand Sitec No. of knives: 25 Slitting width: 40-1000 mm Material to cut: Plastic films, Laminated Cutting typ Location : EUROPE (Western and Northern)

Price : On request

Brand Blik Shredder in good working conditions Type: Two shafts Rotor: Length 400 mm Output: 600 kg/h dependin Location : EUROPE (Western and Northern)

Price : On request

Process Rate: 110 CFM Hoppers: 3 Bank & 6 Bank (Total 9 Hoppers) Hopper Capacity: 15lbs. each (RH15) Voltage: Year(s) : 2017 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

OPENING: 8x24 HP Year(s) : 1997 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

CFM 600 DRYER TEMPERATURE 350 DEG DEW POINT Year(s) : 2012 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

CAPACITY: 55 TON SHOT SHIZE: 2.2 OZ TIE BAR SPACING: 14.17” X 12.12” PLATEN DIMENSIONS: 19.69” X 18.31” MIN/MA Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

TRAVERSE STROKE: 3,000 MAIN ARM STROKE: 1,600 KICK STROKE: 850 PAYLOAD: 15 KG DESIGNED FOR MACHINE TONNAGE RAN Year(s) : 2011 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

TRAVERSE STROKE: 1,640 MAIN ARM STROKE: 800 KICK STROKE: 300 DESIGNED FOR MACHINE TONNAGE RANGE: 100 TON Year(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

automatic Injection Molding Machine STROKE PER MINUTS 550 SPM STROKE LENGTH 200 MM ADJUSTMENT OF RAM 60 mm Location : ASIA (South)

Price : On request

Used 10" x 12" Rapid Granulator With 8" Wide Pull Rolls 8" Wide Top Feed Pull Rolls With One Smooth Steel Roll Location : AMERICA North (USA-Canada-Mexico)

Price : On request

clamping force 35 Ton screw diameter 25 mm shot weight PS 40 g shot volume 45 cm injection pressure 1640 kg Year(s) : 1991 Location : ASIA (South)

Price : On request

Capacity 850 ton Year(s) : 1992 Location : ASIA (South)

Price : On request

6″ x 9″ feed throat 9 knife staggered rotor 2 bed knife 2.55 Kw (3 HP) 230/460-volt 1140 RPM motor Robot / Han Location : AMERICA North (USA-Canada-Mexico)

Price : On request

6″ x 6″ feed throat 6 knife staggered rotor 2 bed knife 2.55 Kw (3 HP) 460-volt 1140 RPM motor Robot / Hand in Location : AMERICA North (USA-Canada-Mexico)

Price : On request

11″ x 11″ cutting chamber with two “S” cutters 2 HP 230/460-volt motor top hand feed hopper gravity bottom dis Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Stainless steel construction. 12 in. dia. x 5 ft. 6 in. long screws. Jacketed mixing section measures approx Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Horizontal Twin Shaft co-rotating and closed type continuous Kneading Processor Approx. 4 in. (100 mm dia.) p Year(s) : 2002 Location : AMERICA North (USA-Canada-Mexico)

Price : On request