Menu

Used POY, FDY, DTY, BCF, CP, etc

173 results
4

Type T/FIL 1483 HDPE /PPmonofilament extruding line, range Ø0.25 – 0.50 mm capacity2,0 – 4,2 to/24 hours, con... Year(s) : 2006 Location : EUROPE (Western and Northern)

Price : On request

More details  
4

Type JC-MNP75 75 mm HDPE /PP monofilament extruding line, range Ø0.25 – 0.50 mm, capacity 1,2 -2,2 to/24 hours... Year(s) : 2008 Location : EUROPE (Western and Northern)

Price : On request

More details  
4

85 mm HDPE /PP monofilament extruding line, range Ø0.25 – 0.50 mm capacity 1,4 -2,6 to/24 hours Consisting of... Year(s) : 2019 Location : EUROPE (Western and Northern)

Price : On request

More details  
4

One fixing machine 12 m steaming chamber creel RAT2S 48 yarns pre feeding device PRE TV2-2S ARG-M heat set ma... Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request

More details  
Auction
2
SAVIO MATEC ULTRA-C, CYLINDER 4 ", 402 NEEDLES - TIGHTS PRODUCTION MACHINE

Machine for the production of pantyhose. Equipped with Lycra feeder "Massardi" or BTSR. Always in use. Can be... Location : Poland

Gabriella D. B. Krajda Sp. J.
May, 31

View auction
View all Auctions in this category
3

Tape Line Extruder For the processing of PP tapes Model: SJMS-Z120×33-1600×8 Specially Designed “ Two Stage St... Year(s) : 2012 Location : EUROPE (Western and Northern)

Price : On request

More details  
32

Line 19 Winder 614R Ends 12 Position 36 year 08/2010 Yarn Range 100-300 Pitch 1,6 spinbeam 3 Distance 6 Spi... Year(s) : 2007, 2010, 2014, 2018 Location : ASIA (China - Taiwan - HKG)

Price : On request

More details  
11

Purchased used by the current user but started in 2006 after full renovation and upgarding. Originally it is... Location : EUROPE (Western and Northern)

Price : On request

More details  
8

HENGLI MACHINERY Polypropylene Tape Line Extruder You are welcome to inspect the machine Dismantled and loadi... Year(s) : 2012 Location : MIDDLE EAST

Price : On request

More details  
4

Mast System 48 Positions Without Accumulator Origin Germany Year(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
7

1x Superba TVP3 Year: 2008 60 spindles With frise box 3x Volkmann VTS 05-C Twisting and Cabling Year: 2008 an... Year(s) : 2008, 2010 Location : MIDDLE EAST

Price : On request

More details  
10

MADE IN ITALY Extruder with automatic feeding + Resin heater with 100 Kg storage capacity 90 mm thread Capacit... Year(s) : 1995 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

8 pos.of POY Barmag ACW winders 200mm/6 ends From extruder to winder. Year(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
2

48 spindle MF4 Friser HEP ( Pre- steamer) 12m steaming chamber ARG-M Control system Pre feeding device ? D... Year(s) : 2000 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
2

24 positions Cylindrical exit 254 mm (10”) Creel Suction 400 V/ 50Hz Year(s) : 1998 Location : EUROPE (Western and Northern)

Price : On request

More details  
13

Consist of: - 75 mm screw extruder - water bath - three godets - two ovens - 48 Sahm winder - one waste winder... Year(s) : 1988 Location : EUROPE (Western and Northern)

Price : On request

More details  
15

Spindles : 240 spindle per set 3 track roller Tension regulating device : Available Machine condition: Running... Year(s) : 2011 Location : ASIA (China - Taiwan - HKG)

Price : On request

More details  
0

6 position - 2 ends/position. Denier range: 1600 to 2400 Dtex Spinning Speed: 1400 - 2000m/min Capacity: 2 t... Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
28

CHANGEABLE CORE DIAMETER ON WINDER ( 38 mm dia – just for LOHIA circular looms creel !; or ‘regular “ 90 mm d... Year(s) : 1996 Location : EUROPE (Central and Eastern)

Price : On request

More details  
17

Composition 1. DOSING UNIT 2. EXTRUDER with 90 mm dia nozzle 3. MELT PUMP WITH DRIVE 4. WIDENING ATT. – 1... Year(s) : 2007 Location : EUROPE (Central and Eastern)

Price : On request

More details  
11

1 x FET, YOC 1997 Line capacity 70 000 kg./month Was used for making carpet yarn. Density of the yarn from 13... Year(s) : 1997 Location : RUSSIA and Central Asia

Price : On request

More details  
0

Extrusion line The main components of the production plant are: 1x BARMAG BA KEP 90-26,3-S extruder 1x BARMAG... Location : EUROPE (Western and Northern)

Price : On request

More details  
0

The main components of the production plant are: 1x BARMAG KEP 200-26,3-S extruder 1x KNÖDLER FZ 6000 2-Z-ED 2... Location : EUROPE (Western and Northern)

Price : On request

More details  
8

Year: 2006, complete renewed 2018 tri color and mono PP and polyamid (didnt run polyamid) 3 extruders 6 winder... Year(s) : 2006 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
27

2003 years 4 sets 2004 years 2 sets 2006 years 4 sets each machine with double shaft with extra shaft too... Year(s) : 2003, 2004, 2006 Location : ASIA (China - Taiwan - HKG)

Price : On request

More details  
2

Model TVP/2 Reconditioned by Superba in 2018 Each Comprising of... Year(s) : 2018 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  

You can find used POY, FDY, DTY, BCF, CP, etc on Wotol

The main manufacturers of POY, FDY, DTY, BCF, CP, etc are Barmag, Superba, Neumag, Murata, Power, Fehrer, Starlinger, Dref, Fare, Rieter, Comoli, Fare p.p., JWell, Leonard.

HS code 8444 - Machines for extruding, drawing, texturing or cutting man-made textile materials. 
HS code 8444 00 10 - Electrically operated 

Q&A corner - questions and answers received from members

Q: What is your PLASTICISERS CF MULTIFILAMENT PP YARN machine producing currently?
A: It is now producing 300 denier/72 filaments intermingled pp cf multifilament yarn.

Q : What yarn tenacity was made so far? Highest possible tenacity for 800 denier yarn?
A : The machine itself is for high tenacity production. 4,5 gr/denier, medium tenacity yarn manufactured according to the yarn customer’s request; but with special raw material (for high tenacity yarn raw material) higher tenacities can be achieved.

Q; What are the meaning of all these abreviations such as POY, FDY, DTY, BCF, CP etc
FDY: Fully Drawn Yarn
LOY: Low Oriented Yarn, 
MOY: Medium Oriented Yarn,
POY: Partially Oriented Yarn, 
HOY: High Oriented Yarn,
FOY: Fully Oriented Yarn
DTY : Draw Textured Yarn or also False Twist Texturing
PET: Polyethylene terephthalate fibre
PES: Polyester
BCF : Bulked Continuous Filament
THere are many more and the list will be very long. Don't hesitate to ask us.

Q : Where can I find makers for lines to produce yarn for BCF for carpet use?
A: We have helped a buyer to dismantle and load such a line in France. The line was customs made and the key parts of the line such as the reactors and flashers where 40 years old and the maker was not a textile machine manufacturer. Such lines are designed by an engineering company for the customeraccroding to his needs and then each element of the line will be manufacturered for him only. The customer who bought this line was more intersted by the engeneering and improvement made on this line in the past 40 years than on the machines themselves.

Q : You offer a used Barmag, MAE Melt spinning line 24Y from 2011. Can we produce on this machine Polyester High Tenacity Yarns?
A:
On this used Mae melt spinning machine it can be produced only POY yarns.

Q : What kind of denier your used POY LINE with Godets, SHANGHAI JWELL, CHINA ( 2012 ) can produce?
A : We are producting only Virgin Chips for producing coloured yarn on our JWELL Poy line.

Q : Is a used SML BCF Fiber Extrusion Line, monocolor TWIN suitable for nylon or polyester?
A : This SML line is producing Polypropylene multifilament spinning line with a capacity of 320 kg/hr suitable for production of fully drawn (FDY), medium drawn (MDY), pre-oriented (POY) and bulk continuous filaments (BCF). It is not suitable for nylon or polyester.

Q :Weare interested in a Barmag, Zimmer ES12 Complete POY Filament Spinning Line for Polyester 264 tons/month capacity balanced on average counts what can it produce?
A : This used Barmag, Zimmer ES12 can be splited into 1 x 12 winders line, producing aprox. 22 tons/month each.
Denier range: 50 den/70 den/110 den/ 120 den - Dtex: 50 at 167 can you produce tex 150/48 and dtex 300/96With regard to the production of wires in our line, the dtex 150/48 has no problem.
With respect to the dtex 300/96 up to 144, it also produces, but needs to do duplication the wires.

Q : What was the main denier production that it was producing your used POY LINE with Godets, SHANGHAI JWELL? Besides POY yarnscan it aslo produce FDY yarns?
A : The main denier that was being produced with this SHANGHAI JWELL Polyester POY line was 250 D POY, The production on one machine of 36 ends with 105 mm spinnerets (Hydro Split) on 250 POY was around 4.3 MT / Day and total production of Six machine of 36 ends with 105 mm spinnerets (Hydro Split) on 250 POY was around 26 MT / Day. Sometimes even 300 D was produced on these machines. The offered machines cannot produce FDY Yarn and can only produce POY Yarn.

Q : I don’t see the extruder included in the list Barmag, Zimmer POY 1998, also Is it an 8 positions machine and why 17 winders (8x2 positions) and 1 as spare?
A :Extruder, Quenching air and Drying are not included in our Barmag, Zimmer POY Line 5. Machine is 6 ends x 16 positions = 96 threadlines. 16 winders for 16 positions and 1 as spare.
 

Q : Please send more details about history of your used Autefa, Barmag, Neumag Staple Fiber Plant Complete Production Line capacity 35-40 tonnes per day. Also is it suitable for viscose?
A : Spinning is for Polyester polymers – vsicose is a totally different system. From the finishing line (drawing etc) it could be – but we are not sure … We purchased this line used (orinal from the 70's) in the 2003 but started in 2006 after full renovation and upgarding. This Staple Fiber line is having a two step process which is very good in order to have better textiel-physical parameters, especially regarding the elongation, the shrinkage and the tenacity !!! … ans such a two step process is of course also more efficient and flexible becaus in case there is a problem in the line only one step has to stop and the other step can still continue.
Originally it is from the 70's but it has been continuously updated.
Since 2006 again many new investments have been undertaking - new parts, new areas – only the last couple of years big new engines were integrated and the baling press was totally reworked !

Q: Please describe the how is composed your Synthetic Yarn Manufacturing for Nylon SDY Plant and Polyester SDY
A : Plant A Complete Nylon SDY Plant, Raw Material: Caprolactam, Flow: [Continuous Polymerisation] (Caprolactam)> Storage Tank> VK Tube Reactor> Chip Cutter> [Drying] Continuous Dryer> Dried Chip Silo> [Spinning] Feed Tank>Extruder>Spin Beam>Gear Pump>Quenching>Godet>Winder>Auto Doffer>Drum Cart>[Packing]Inspection/Sorting/Packing
- Installation: 1994~2000
- Nylon Polymer Daily Production Capacity: 100~130 Ton
- Nylon SDY Daily Production Capacity: 150~200 Ton
- SDY total 16 lines (x 16 positions each = total 256 winders)
- Major Products: 75/24, 40/10 and more.
- Main Manufacturers: Toray, Teijin Seiki, Japan Steel, etc.
Plant B Polyester SDY Plant
- Installation: 1994~2000
- Polyester SDY Daily Production Capacity: 130~180 Ton
- SDY total 12 lines (x 24 positions each = total 288 winders)
- Major Products: 75/36, 50/24 and more.
- Main Manufacturers: Toray, Japan Steel, etc.
 

Create an alert