Used SHEETING, CUTTING

Working width max: 2600 mm Substance of the paper Knife load cross cutter: min. 200 g/m2 up to max. 800 g/m2 P Year(s) : 1958 Location : EUROPE (Western and Northern)

Price : On request

Reduced price for immediate sale & removal in the UK Approximately 6 truck loads Details: Twin double Fava Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

- Cutting device lengthwise and crosswise for cutting pressed board - Longitudinal working width approx. 2,300 Year(s) : 1975 Location : EUROPE (Western and Northern)

Price : On request

55″ Maxson twin knife sheeter. 55″ knife with 4 Tidland shear cut slitter knives 15 2000″ cut off length with Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Special offer at attractive price: 1.000 mm Sheeter model SOMA with 10 (TEN) unwinds for paper weight 18 - 500 Year(s) : 1995 Location : EUROPE (Central and Eastern)

Price : On request

Model: TRB Speed max: 200 m/min Size min/max: 450/1620 mm Knife load: 500 gsm Max stacking height: 1500 mm St Year(s) : 1989 Location : EUROPE (Western and Northern)

Price : On request

Used pile turner type SWH 125 RLA Make Busch With Jogger and Air but only turning mode is working Rated voltag Location : EUROPE (Western and Northern)

Price : On request

MANDREL: 10.8" SCCR: 65 KA - 600VRMS ELEC ASSY: 155878 AC MOTOR - 575 VOLTS 2HP Motor 3 PHASE - 60 Hz - 1288 W Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Core cutter - special purpose machine Manufacturer Core Link Treom Manufacturing Year 1986 Paper width mm 2100 Year(s) : 1986 Location : EUROPE (Western and Northern)

Price : On request

120" Working width 5" Shaft diameter 1/4" to 5/8" Core Wall Thickness Complete with ABB controls 460 Volt moto Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Model: D21SH1010 5" diameter mandrel Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1400mm working width 250mpm with stacker 6 unwind stands on turning table (2x 3 unwind stands) Year(s) : 1979 Location : EUROPE (Western and Northern)

Price : On request

Sold in good conditon - as dismantled and well stored at the very end of 2020....well documented, tagged and p Year(s) : 1984 Location : EUROPE (Western and Northern)

Price : On request

Maker: Clark-Aiken Location : EUROPE (Western and Northern)

Price : On request

AUTOMATIC CORE CUTTER Model A301 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

inexpensive 1.250 mm sheeter model BORYS 4 make Borys, (made in Ukraine a refurbished in Poland for less than Year(s) : 1988, 2022 Location : EUROPE (Central and Eastern)

Price : On request

700 mm sheeter with online print 3 col. - Year 2015 - Make :this machine was produced by Manzoni together wi Year(s) : 2015 Location : MIDDLE EAST

Price : On request

120" Appleton Series D automatic tube cutter 480V 3PH 60HZ 6" Core Diameter Set up and operations manual Rece Location : AMERICA North (USA-Canada-Mexico)

Price : On request

check photos and video online at the offer or youtube link https://www.youtube.com/watch?v=9OF3waIkwbU&featur Location : EUROPE (Western and Northern)

Price : On request

Used board sheet cutter Pasaban 1600 mm . Still in production. Location : EUROPE (Western and Northern)

Price : On request

1400mm working width with stacker 6 unwind stands on turning table (2x 3 unwind stands) working speed: 250m Year(s) : 1979 Location : EUROPE (Western and Northern)

Price : On request

Brand: Clark Aiken Model: Unknown Width: 1550 mm Year: Unknown Speed: max 200 m/min Grammage:360 g/m2 Location : AMERICA (Central and South)

Price : On request

Dainici Seiko Sheeter Sheet size max 800 x 900 mm Auto pile stack delivery 3 double unwinds Very nice cheap ma Location : EUROPE (Western and Northern)

Price : On request

Holweg sheeter, 1100 width, 6 x unwinds Location : EUROPE (Western and Northern)

Price : On request