Used Size reduction machine

3 phase electrics Good condition 210mm wide bed Year(s) : 2017 Location : EUROPE (Western and Northern)

Price : On request

3 phase 63amp electrics Excellent condition Supplied with Revic mobile hoist (3 phase 16amp) To take 200l tote Year(s) : 2021 Location : EUROPE (Western and Northern)

Price : On request

160mm angle grinder, stainless steel machine, loading device for 200 liters bins, hopper capacity approx. 35 Location : EUROPE (Western and Northern)

Price : On request

Has VFD Drive Wash Down Motor Dicing Size: 1/4" x 1/4" Foot Print: 100" long x 45" Wide x 62" High Weight: 950 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Replaced drive belt, ovehauled and works fine. An optional tool in stock is included with the purchase of the Year(s) : 2002 Location : EUROPE (Western and Northern)

Price : On request

14mm thickness Location : EUROPE (Western and Northern)

Price : On request

Application: dry granulation Materials : Stainless steel Roller diameter – 120 mm Roller width – 40 mm Capacit Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

IRAS Pre-cutting machine for fish offal. The pre-cutted material is fed to a mono pump that pumps the minced Year(s) : 2013 Location : EUROPE (Western and Northern)

Price : On request

Introducing the OptimusPro for the production of gourmet vegetable cuts. This very versatile little machine ca Location : EUROPE (Western and Northern)

Price : On request

This machine is suitable for products such as cheese , vegetables and nuts Location : EUROPE (Western and Northern)

Price : On request

9x18mm Test drive and review Works perfectly Location : EUROPE (Western and Northern)

Price : On request

Stainless steel cheese cutter, air operated, two way cutting with vertical cut inside machine, discharge wit Location : AMERICA North (USA-Canada-Mexico)

Price : On request

3 H.P. motor, Direct gear drive transmission, Blade speed; 4150 fpm, Tri-rail carriage, Total open constructi Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Designed for use in high-volume supermarkets, butcher shops, and small to medium sized processors, the 180A Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Stainless Steel Production: 10/12 ton/h Dimensions: Weight 2500mm X Wight 130mm X H 1500mm Weight: Kg 350 abou Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request

OPERATION: MANUAL GRAVITY FEED. CUTTING CAPACITY: UP TO 11” WIDE 6” HIGH OR 8” DIAMETER. KNIFE: 12 ½” DIAME Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1/2HP 1PHASE 115V 7AMPS Location : AMERICA North (USA-Canada-Mexico)

Price : On request

THE OLIVER MODEL 797 SERIES OF BREAD SLICERS ARE OF A COMPACT, STURDY, TIME TESTED DESIGN, WHICH HAS BEEN US Location : AMERICA North (USA-Canada-Mexico)

Price : On request

THE OLIVER MODEL 797 SERIES OF BREAD SLICERS ARE OF A COMPACT, STURDY, TIME TESTED DESIGN, WHICH HAS BEEN US Location : AMERICA North (USA-Canada-Mexico)

Price : On request

1/2 INCH SLICE. MINIMUM: 4.8"L X 2.4"W X 2.4"H MAXIMUM: 17.0"L X 11.4"W X 7.0"H. BAXTER BREAD SLICERS COME IN Location : AMERICA North (USA-Canada-Mexico)

Price : On request

The machine is in top condition. inside it looks new. Extra knife included Year(s) : 2004 Location : EUROPE (Western and Northern)

Price : On request

Replace Rifa capacitor+relay on circuit board. Disconnected defective pre-press sensor. Replace connection cab Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

· Chain Driven with Reject of Trims · Motor 1 HP, 220 VAC, 3PH, 60 Hz · Electrical Panel 220 VAC. Location : MIDDLE EAST

Price : On request

Stainless Steel Bandsaw large sized meat saw specifically designed for commercial use motor : 1.5 kw 415v 3 ph Location : OCEANIA

Price : On request

Height 2250 Width 1800 mm Length 1950 mm Capacity 500 l Voltage Electrical: 400V 50Hz 3N Main material Stainle Location : EUROPE (Central and Eastern)

Price : On request