Used Stenters, steamers, dryers, water extraction, etc

ROLLER WIDTH 2.000 MM. ENTRANCE WITH UNWINDING STATION FOR A-FRAME NON-STOP J-SCRAY ACUMULATOR KUSTERS IMPRE Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

PRE-TENSION ENTRY BIANCO 2 BOWL PADDER WEFT STRAIGHTENER 6 METRE ENTRY RAILS WITH TANDEMATIC EDGE SPREADERS A Location : EUROPE (Western and Northern)

Price : On request

FOR DIGITAL PRINT FABRICS 2.400 MM WW YEAR GAS HEATING TAKE OFF BY PLAITER OR CENTER WIND ONTO A FRAMES Year(s) : 2011 Location : EUROPE (Western and Northern)

Price : On request

FOR TUBULAR KNIT FABRICS FOR HYDROEXTRACTION IMPREGNATION FOR TUBULAR KNITS YEAR 1998 1300MM WORKING WIDTH R Year(s) : 1998 Location : EUROPE (Western and Northern)

Price : On request

ROLLER WIDTH 2.400 MM 8 BAYS ECON-AIR MODEL GAS HEATED VERTICAL PIN CHAIN E+L WEFT STRAIGHTENER IMPREGNATI Location : EUROPE (Western and Northern)

Price : On request

COMPOSED OF UNROLLER, BETA PADDER 3 ROLLERS. MAHLO WEFT STRAIGHTENER E+L INTRODUCTION FR5501 6 CHAMBERS OF 4 Location : EUROPE (Western and Northern)

Price : On request

SALVADE PRINT STEAMER ROLLER WIDTH 2300MM. BLANKET WIDTH 2150MM. CLOTH CONTENT APPROX 250 MTS. STEAM HEATED Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

SEMI CONTINUOUS OPEN WIDTH TUMBLER DRYER 4 CHAMBERS ENTRY FROM ROLLS OR IN PLAITED FORM TENSIONLESS FEED ON Location : EUROPE (Western and Northern)

Price : On request

4 CHAMBERS GAS HEATED BABCOCK 2 BOWL FINISHING PADDER BIANCO WEFT STRAIGHTNER TYPE DIGITEX ENTRY WITH E+L GUI Location : EUROPE (Western and Northern)

Price : On request

WW 3600MM Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

WEFT DETECTION AND STRAIGHTENING UNIT Location : EUROPE (Western and Northern)

Price : On request

2.400 MM ROLLER WIDTH TOTAL LOAD 10,000 KG MAIN DRIVE CARTER HYROSTATIC VARIABLE DRIVE TOP ROLLER NITRILE RUBB Location : EUROPE (Western and Northern)

Price : On request

RPM 700. STAINLESS STEEL BASKET 1500 MM DIA. INTERNAL LOCKING LID MAIN DRIVE IS HYDRAULIC Location : EUROPE (Western and Northern)

Price : On request

IN STAINLESS STEEL WITH J BOX INFEED Location : EUROPE (Western and Northern)

Price : On request

HEATING SYSTEM STEAM SOFT SETTING MACHINE SUITABLE FOR DRY PROCESS 2 CHANNELS 4 ROPES STEAM HEATED ABB INVER Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

TYPE: D- FMC /3 WORKING WIDTH 3.000 MM ROLLER WIDTH MM. 3200 THREE CYLINDERS WITH FOLLOWING DISPOSAL: GUM S Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

RE-CONDITIONED IN 2015 BASKET DIAM.MM.2000 X 1000 DEPTH TOTALLY MADE IN STAINLESS STEEL AISI 304 (BASKET AND Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

ROLLER WIDTH MM. 1400 2 X CHAMBERS WITH KEVLAR CONVEYOR CARPET GAS HEATED WITH MAXON BURNERS GOOD GRADE OF SH Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

DRYER FOR KNITTED FABRIC SUITABLE FOR TUBULAR OR OPEN WIDTH FABRIC ROLLER WIDTH 2300 MM. TWO CHAMBERS TWO TE Year(s) : 1988 Location : EUROPE (Western and Northern)

Price : On request

COMPLETE WITH: - 3 BOWLS BETA PADDER - BIANCO WEFT STRAIGHTENER 6 OPTICS 4 CHAMBERS GAS HEATED WITH SELVEDG Year(s) : 1992 Location : EUROPE (Western and Northern)

Price : On request

ROLLER WIDTH 2200 MM FABRIC CONTENT MT. 310 SPEED RANGE 4.5 TO 45 MT/MIN PERMANENT/DWELL TIME FROM 6.8 TO 6 Year(s) : 1998 Location : EUROPE (Western and Northern)

Price : On request

DRIVE DC STEAM HEATING SYSTEM HIGH ENTRY ON FACE SIDE ROOF THERMO OIL HEATING STEAM SATURATION UNIT LOOP CHAMB Location : EUROPE (Western and Northern)

Price : On request

WITH PRE TENSION ENTRY 60 METRES CLOTH CONTENT 3.000MM FACE WIDTH WITH 16 TOP ROLLERS AND 17 BOTTOM ROLLERS Location : EUROPE (Western and Northern)

Price : On request

FOR TUBULAR KNIT FABRICS AIR BALLON SQUEEZER / PADDER FOR HYDROEXTRACTION IMPREGNATION FOR TUBULAR KNITS YEA Location : EUROPE (Western and Northern)

Price : On request

MAHLO WEFT STRAIGHTENER TYPE RFMC 74 YEAR 1986 2.000MM WORKING WIDTH WITH FOUR SCANNING HEADS MODIFIED TO Year(s) : 1986 Location : EUROPE (Western and Northern)

Price : On request