Used Stenters, steamers, dryers, water extraction, etc

Yoc 1980 fully revamped in 2009 ( new PLC control, chain replacement) steam heating 10 bars max temp.160°C. Year(s) : 1980 Location : EUROPE (Western and Northern)

Price : On request

WORKING CONDITIONS Year(s) : 1997 Location : MIDDLE EAST

Price : On request

6 CHAMBER SINGLE PADDER BIANCO WEFT STRAIGHTENER MAXON BURNER GAS HEATED WORKING CONDITION Year(s) : 1998 Location : MIDDLE EAST

Price : On request

Monforts 4 cabins, oil heating, working width of 180 cm. Location : MIDDLE EAST

Price : On request

1 set width 320cm 1 set width 340cm Year(s) : 2012 Location : ASIA (China - Taiwan - HKG)

Price : On request

Engine of 12.5 kW (15 hp), 42 mm shaft, hydraulic clutch and 707 rpm. With electric panel. 220-380 V. Cover wi Year(s) : 1981 Location : EUROPE (Central and Eastern)

Price : On request

Type 222-50-1800 width 1800 mm stainless steel tank with mixer control cabinet with Siemens Touch Screen motor Year(s) : 1983 Location : EUROPE (Western and Northern)

Price : On request

Power 12kw Batch type Front loading Capacity approx 36 cones x 750 gram Removes approx 10kg of water per h Location : EUROPE (Western and Northern)

Price : On request

Weft straightener Mahlo w.w. 2.20 m, 4 heads year 1994 Year(s) : 1994 Location : EUROPE (Western and Northern)

Price : On request

Weftstraightener Corino model FLC4 w.w. 2.40 m year 2008 Year(s) : 2008 Location : EUROPE (Western and Northern)

Price : On request

Strayfield Radio Frequency Yarn Drying Machine 1992 75 KW without lamp running situation. Year(s) : 1992 Location : MIDDLE EAST

Price : On request

WET-DRY INSTALLED AND RUNNING Year(s) : 1997 Location : MIDDLE EAST

Price : On request

No. 1 stenter SANTA LUCIA model RED3/240 year 1991 w.w. 240cms 3 chambers of 4 meters length each, gas fir Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

Weft straightner BIANCO TRAMATEX pin wheels – mid 90’s ww 200 cm Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

TYPE: D- FMC /3 WORKING WIDTH 3.000 MM ROLLER WIDTH MM. 3200 THREE CYLINDERS WITH FOLLOWING DISPOSAL: GUM S Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

RE-CONDITIONED IN 2015 BASKET DIAM.MM.2000 X 1000 DEPTH TOTALLY MADE IN STAINLESS STEEL AISI 304 (BASKET AND Year(s) : 1991 Location : EUROPE (Western and Northern)

Price : On request

ROLLER WIDTH MM. 1400 2 X CHAMBERS WITH KEVLAR CONVEYOR CARPET GAS HEATED WITH MAXON BURNERS GOOD GRADE OF SH Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

DRYER FOR KNITTED FABRIC SUITABLE FOR TUBULAR OR OPEN WIDTH FABRIC ROLLER WIDTH 2300 MM. TWO CHAMBERS TWO TE Year(s) : 1988 Location : EUROPE (Western and Northern)

Price : On request

COMPLETE WITH: - 3 BOWLS BETA PADDER - BIANCO WEFT STRAIGHTENER 6 OPTICS 4 CHAMBERS GAS HEATED WITH SELVEDG Year(s) : 1992 Location : EUROPE (Western and Northern)

Price : On request

ROLLER WIDTH 2200 MM FABRIC CONTENT MT. 310 SPEED RANGE 4.5 TO 45 MT/MIN PERMANENT/DWELL TIME FROM 6.8 TO 6 Year(s) : 1998 Location : EUROPE (Western and Northern)

Price : On request

DRIVE DC STEAM HEATING SYSTEM HIGH ENTRY ON FACE SIDE ROOF THERMO OIL HEATING STEAM SATURATION UNIT LOOP CHAMB Location : EUROPE (Western and Northern)

Price : On request

WITH PRE TENSION ENTRY 60 METRES CLOTH CONTENT 3.000MM FACE WIDTH WITH 16 TOP ROLLERS AND 17 BOTTOM ROLLERS Location : EUROPE (Western and Northern)

Price : On request

FOR TUBULAR KNIT FABRICS AIR BALLON SQUEEZER / PADDER FOR HYDROEXTRACTION IMPREGNATION FOR TUBULAR KNITS YEA Location : EUROPE (Western and Northern)

Price : On request

MAHLO WEFT STRAIGHTENER TYPE RFMC 74 YEAR 1986 2.000MM WORKING WIDTH WITH FOUR SCANNING HEADS MODIFIED TO Year(s) : 1986 Location : EUROPE (Western and Northern)

Price : On request

BIANCO WEFT STRAIGHTENER WORKING WIDTH 1850 MM YEAR 1995 FDC MODEL ROLL WIDTH 2000 MM SUITABLE FOR WOVEN FA Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request