Used Tablet press & coating, capsule fillers and others
1,779 resultsunit features oscillating bar and portable base. Large throat for increased throughput compared to conventiona Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsmaximum tablet of 7/16" (11mm) at speeds to 2000 per minute. Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details5 Hp, 220 Volts, 1730 RPM, 3 Phase, 60 Hz. Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsOutput 24000 capsules/hr Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsOnline auction of healthcare facility utilities and manufacturing equipment (e.g. 2015 SEI LASER X-TYPE, SIEME Location : Germany
Troostwijk Auctions
Nov, 13
Capsule sizes: 000-5 Output: 6,000 to 48,000 Capsules per Hour Dosage Types: Pellet Filling Tablet Filling Liq Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsSuitable for mixing powders, drying granular crystalline coarse or similar material in pharmaceuticals fine ch Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsstainless steel 60" Accelacota without AHU (see below) The unit includes trombone arm with (3) Schlick spray g Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details1-Thomas 48" Accela Cota. Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsKMC has thirty two (32) of these Anthony Kent & Ross 4" x 8" laboratory three roll mills (TRMs) in stock and r Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailskeyed, 7/16" max. tablet, missing upper guards & other parts Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsThis is a standard Stokes F Press which can press a tablet up to ¾" max. diameter at speeds up to 95 tablets p Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsaccepts"D" tooling, 1"max diameter. Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsall stainless steel construction including bin arm base plate, pedestal, drive covers and operator panels desi Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details316 stainless steel product contact surfaces with 8.5", 11.5", 13", 14.5" and 16" diameter perforated pans wit Year(s) : 2003 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsCapacity: 24,000-50,000 capsules/hr max. Pressure: 0.4 - 0.6 Mpa. Air Supply: <; 0.1m3/min. Electrics: 3Ph/60H Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsIncludes spray arm (no guns which can be supplied at added cost) Includes Thomas Spray 4 spray system. Air han Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsSingle sided station "B" tooled keyed uppers, precomression forced feeder. Manual controls for upper punch pen Year(s) : 1987 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsMaximum tablet diameter is 5/8" (16mm). Single sided. Has VFD, has push button starter currently set 3/60/208V Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsUnit comes with 2 interchangable pans, 18 Inch and 24 Inch. Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsAccepts full "B" 1.1875" dies, keyed, double sided open feed frames, upper punch penetration square frame, wit Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsIncludes castered control panel Catalog rated at 200 kg/hr - 750 kg/hr. Motor approximately 3HP Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More details16 Station Keyed turret, accepts "B" dies, no feeder assembly Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsLocation : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsPlace filled cartridges/vials/ampoules (the product to be inspected) into feed hopper, product automatically f Year(s) : 2008 Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsFeatures spray arm with 3 guns variable pan speed, 5HP (3/60/220-440V) explosion proof motor, pan only. Mist c Location : AMERICA North (USA-Canada-Mexico)
Price : On request
More detailsYou can find used Tablet press & coating, capsule fillers and others on Wotol
The main manufacturers of Tablet press & coating, capsule fillers and others are Manesty, Stokes, Thomas, Fitzpatrick, Vector, Glatt, Ima, Fette, Korsch, Bosch, Thomas Engineering, Kikusui, Kilian, King, Capsugel, Ima, Fitzpatrick, Pharmafill, Lakso, Gemco, Qualicaps, Adtech, Bohannan, Kanara, Shionogi.
The main model are XL800, CS1, 300, HC-170, HCT-60, T300, BB2, 450-30, XPress 500.