Used Tenoner, Notches, Router, Jointer, Milling and Others

6.6 HP 220V 20 A 3 Phase Straight Knife 16″ Width Location : AMERICA North (USA-Canada-Mexico)

Price : On request

K2i-450 / RL 12.20 m – 3.60 m Color: RAL 5012 blue Log length (input): 14.80 m Log length (output): 12.80 m Cr Year(s) : 2009 Location : EUROPE (Western and Northern)

Price : On request

CAMBIUM Production Program Line laser for component referencing Feeding and loading cross conveyor - 7 strands Year(s) : 2024 Location : EUROPE (Western and Northern)

Price : On request

3-AXIS 4-HEAD SINGLE-TABLE CNC ROUTER (460/60/3 electrics) Standard Specifications: - ~ 5' x ~9' single movin Year(s) : 1996 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Weight 560kg T/MIN 3000/4500/6000/7000 Max dia freeskap 220mm Max dia pennenkap 360mm Location : EUROPE (Western and Northern)

Price : On request

Fully automatic joinery machine type K1 5-strand cross-feed conveyor Additional cross-feed conveyor strand wit Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

Speed-Cut-Machine SC3 – 200 6-strand cross-feed conveyor with shaft extension and soft start 3.2 t lifting tab Year(s) : 2013 Location : EUROPE (Western and Northern)

Price : On request

C3 Cutting Machine (Mirror Cutting Machine) Angle and tilt drive for sawing station Automatic infeed system 6- Year(s) : 2014 Location : EUROPE (Western and Northern)

Price : On request

600/347 Volt Dual Table cnc set up and positioning Dual head router, boring block, tool change Year(s) : 2017 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Finger Jointer System w/ Model NT-25LS-HA Left Shaper, NT-25 RS-HA Right Shaper, Glue System, and NT-20AH-HA P Year(s) : 2004 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

The T54 is a jointer that was actually developed to fulfill two missions: firstly, to perfectly plane workpie Location : EUROPE (Western and Northern)

Price : On request

Good condition Shipping footprint: 103 (length) x 45 (width) x (height) Weight: 1520 lbs Year(s) : 1989 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

(Fixed spindle router – not tiltable!) Operating hours: 493 h (see last picture) Motor power: 7.5 / 9.5 kW (re Year(s) : 2008 Location : EUROPE (Western and Northern)

Price : On request

Motor power 5 / 6 kW (rated current 19 A) Swivel range: -45° to +45° Max. tool diameter: 250 mm Max. slotting Year(s) : 1999 Location : EUROPE (Western and Northern)

Price : On request

Used machine Condition: Fully workshop-tested Equipment and technical specifications: Motor: 5.5 kW Spindle d Location : EUROPE (Western and Northern)

Price : On request

Milling machine with extension table and extension Approved machine with electric height adjustment with digit Location : EUROPE (Western and Northern)

Price : On request

Can be equipped with a feed device at an additional cost Machine is as good as new Location : EUROPE (Western and Northern)

Price : On request

3 phase, 460v, 60 Hz, 30hp machine. Ready in mid-december. Year(s) : 2008 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Conventional control Table size: 1,700 x 750 mm Motor power: 7.5 kW Spindle diameter: 30 / 40 mm Speed(s): 1,5 Year(s) : 2012 Location : EUROPE (Western and Northern)

Price : On request

5-axis tenoning machine Saw, 2 peeling heads, 2 standing axles. Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

Used machine Machine will be completely overhauled Table size 1100 x 880 mm Pole-changing drive motor 5/6 kW S Year(s) : 1984 Location : EUROPE (Western and Northern)

Price : On request

Single station only with (2) trim saws Opens to 8' will close to 7-8" Very good condition Location : AMERICA North (USA-Canada-Mexico)

Price : On request

Mebor 1200 horizontal sawmill Main engine: 45 kW Log diameter: 1.20 m Frame length: 19 m Sawing length: 15 m B Year(s) : 2009 Location : EUROPE (Western and Northern)

Price : On request

ROUTER CAPACITIES: - Spindle Ø50 mm Usable length (above the table) 180 mm Vertical spindle travel 205 mm - Ro Year(s) : 2016 Location : EUROPE (Western and Northern)

Price : On request

La Venus Milling-Boring machine for profiles - Structure: stainless steel - Block clamping system - Moving tab Year(s) : 2010 Location : EUROPE (Western and Northern)

Price : On request