Menu

Used Textile and Leather Machinery

25,183 results
1

~30" wide, pin lagged cylinder, no motors but could be supplied. Designed to mimic Fehrer V21 type. Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  

Price On request

More details
2

16 positions each position independently driven with 1/2 hp 90v DC motor with v.s. control, UHING traversing Year(s) : 2016 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
3

126" wide, includes stationary jack-stand let-off 126" face lighted viewing board with pneumatic nip-hold down Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
5

200" wide, 224" let-off stand with supports, 224" tension bar, elevated operator platform, 200" x 11" dia be Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

TECTEX 2N , 1600mm with compressive batt feed, takeup winder. Year(s) : 2001 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

195" x 8' 5" diameter ran 270-300 deg F. Year(s) : 2009 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

loop type, with ~200' capacity. This is an enclosed insulated SS or aluminum vertical cabinet measuring 41"W Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
9

~750-1000mm working width. Consisting of: AUTOMATEX Camelback Crosslapper, 33" inlet x 52" (~830mm x 1320mm) Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

~1000mm working width single board down punch with needle board installed. Additional Needle Boards with 2" n Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

40" wide, extended apron, spiked stripper, pinned opening roll, updated control cabinet, new spiked apron. Ap Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

27x54" bale, single box downpacking 9" diameter cylinder casing, 20 hp 460v hydraulic pumping unit. Includes Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
4

1625mm (64") belt width, customized as a top belt only laminator. It includes a 20' long bottom conveyor table Year(s) : 2015 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
3

Conquip Winders: (4) unwinds & (1) rewind, tension control, rollers are 27" wide. Hermann type NW Ultrasonic, Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

6 spindles ea 8" traverse on cones Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Nuova Protex 9 positions Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request

More details  
1

1250mm working width, with infeed and exit rollers. Feed system by a pair of polished feed rolls in free stan Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

(2) 400mm rolls steel side walls, rolls mounted in roller bearings suitable entry & delivery device, AC motor Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

Consisting of: Blend Line with (5) 36" weigh pan feeds. XL Step Cleaner. (2) TMI Self Cleaning Bag Collector Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

1.5 hp 230/460v. Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
1

1.5 hp 230/460v. Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

32 carrier, double thick with carrriers, 3 roll takeup, long legs, motors, drive shafts complete overhead trav Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

1600mm working width Wire wound rolls with 2 spare rolls Ran wool & synthetic fibers from 1" to 6". Reported Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
0

77" belt width, entry stand for 2 batch rolls or pulling from A-Frame. 3 roll positions on exit. Trumeter in Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
2

84" x 60" dia cylinder, 80" blanket Hot oil heater, edge guiding, 78" scray, inspection light, and takeup, 480 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
3

Type Racop TR 6, 2005 yr 10" working width E18 gauge needles 480v, 28 beams with manual, reported in VG operat Year(s) : 2005 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  

Find used textile machines from the production of the yarn to the manufacturing of the finished textile

Yarn manufacturing machines such as carding, drawing, carding, spinning machines, twisting, two for one twisters, covering, texturizing, winding, and many more.
The next machines you will find will be for the fabric production by weaving, knitting, tufting and non woven.
Once the fabric is produced you will find machines to treat, and finish it.
There will be wet handling machines such as bleaching, dyeing, continous washing machines, textile printing machines, stenters and dry handling machines such as calendar, raising machines, emerizing, rope openers, saforizing, emboirdery machines and many more. All these machines will give added value to the fabric.
You wil also find more specifica machines that will make the finished product like rope baking machines, braiding machines, quilting machines.
Also listed will be machines for the manufacturing of garments: cutting, sewing, ironing.
There is also a section for laundry machines and an other one for leather machines.

More than 8 million textile machines have been sold in 2019 and this figure will double by 2025.

Largest textile machinery makers are Oerlikin, Rieter, Saurer Schlaforst, Murata, Toyota, Savio, Lakshmi, Van de Wiele, Itema and probably several Chinese makers.

More than 27,000 factories are registered on Wotol and 1800 used machinery dealers and agents .

 

Create an alert
});