Menu

Used Twisting / Two For One (TFO)

500 results
10

Tepeler brand Chenille Yarn Machine 2005-2006 20 spindles 10 heads Speed control,. installed and running s... Year(s) : 2004, 2005 Location : MIDDLE EAST

Price : On request

More details  
7

2 x 24 spindles = 48 positions Can dia. 300 mm and height 230 mm Feeding and delivery traverse: 10’ cylindrica... Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

More details  
4

2 x 48 spindles Can diameter 290 mm, height 270 mm Feeding and output in 10" Year(s) : 1990 Location : EUROPE (Western and Northern)

Price : On request

More details  
11

Electrical cabinet a little more recent 2 x 48 spindles Can diameter 290 mm, height 270 mm Feeding and output... Year(s) : 1993 Location : EUROPE (Western and Northern)

Price : On request

More details  
4

RING TWISTER, "THIERRON" 2x32 = 64 spindles rings Ø 140 mm pitch 180 mm tubes 410 mm creel on the machine Yar... Location : EUROPE (Western and Northern)

Price : On request

More details  
7

ROBLON TWSITERS /PLAITING - MODEL TORNADO 250 4 pcs of 1 spindle /each Each equipped with creel for 12 pa... Year(s) : 1995 Location : EUROPE (Central and Eastern)

Price : On request

More details  
2

128 Spindle 190mm Pot Dia 6" Traverse Cone Delivery Package Conicity 5°57' Balloon Limiter Type 5 Inner Po... Year(s) : 1996 Location : ASIA (South East)

Price : On request

More details  
0

126 positions with heater (for continuous heating setting) cops feeding, take-up 8” Year(s) : 2008 Location : EUROPE (Western and Northern)

Price : On request

More details  
23

3x 1990 4x 1992 cone aluminum cylinder 256 spindles max 1000 gr capacity per cylinder 380v/50hz Year(s) : 1990, 1992 Location : ASIA (South East)

Price : On request

More details  
30

1 x 1995 cone aluminum cylinder 224 spindles max 1000 gr capacity per cylinder 220v/50hz 5 x 2000 cone alumin... Year(s) : 1995, 2000 Location : ASIA (South East)

Price : On request

More details  
3

24 spindles Delivery to cylinders dia. 55mm and 10” (25 cm) long Max dia. to 300 mm of full bobbin Year(s) : 1985 Location : EUROPE (Western and Northern)

Price : On request

More details  
2

2 x 16 spindles, rings dia. 130 mm, tubes 450 mm 2 x 24 spindles, rings dia. 130 mm, tubes 450 mm Year(s) : 2001 Location : EUROPE (Western and Northern)

Price : On request

More details  
3

22x RPR 2 x 1 Twisters Type GC240N Years 2000, 2001, 2002, 2004 60/ 240/ 280 and 320 spindles, 420 mm cops 2x... Year(s) : 2000, 2001, 2002, 2004 Location : EUROPE (Western and Northern)

Price : On request

More details  
2

For continuous yarn 72 spindles /each 200-1200 den Z/S twists 40-200 tpm Year(s) : 1998 Location : EUROPE (Central and Eastern)

Price : On request

More details  
11

double sided with 2 x 20 = 40 spindles pitch 120 mm, ring-dia. 90 mm tubes 400 mm 1 motor each head with 2 spi... Year(s) : 2008 Location : EUROPE (Western and Northern)

Price : On request

More details  
5

2000: 2×36 spindles, pot Φ 10 inch, delivery 10 inch. Hollow inlet shaft diameter 5mm 2001: 2×40 spindles, po... Year(s) : 2000, 2001 Location : EUROPE (Western and Northern)

Price : On request

More details  
0

9x BOURGEAS TWO FOR ONE TWISTERS, double deck 2x40 = 80 spindles, single covering. 1x WINDER, "RATTI", 2x20 =... Location : EUROPE (Western and Northern)

Price : On request

More details  
5

Num of Spindle 36 Ring Diameter 300 mm* 38.1 mm Bobbin height 800mm Spindle speed 6000 rpm Feeding speed 150 m... Year(s) : 2006 Location : MIDDLE EAST

Price : On request

More details  
3

4 Machines of Year 2004 3 Machines of Year 2002 1 Machines of Year 2001 No. of Positions 144 POT DIA 270mm T... Year(s) : 2001, 2002, 2004 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
4

120 spindle, wide gauge Voltage: 480V / 3 Ph / 60 Hz. This cabler is running on the mill floor and can be ins... Year(s) : 1999 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
6

4 machines 120 pozisitions each triple twisting Primary spindles pot size is 78 mm Secondary 180 mm Machines u... Year(s) : 2022 Location : MIDDLE EAST

Price : On request

More details  
15

1. DirectTwist-2C6" Cone to Cone Multi-function Yarn Twisting (MFG:8330) 2. DirectTwist-C6"/D6" Cone to Cone M... Year(s) : 2019 Location : EUROPE (Western and Northern)

Price : On request

More details  
6

144 spindles 10 inches, CARPET TWISTER installed and running situation. Machine is still in production Year(s) : 2004 Location : MIDDLE EAST

Price : On request

More details  
5

5940 spindles of RPR machines. Extremely well-maintained. Almost like new. 10 machines with 320 spindles 10... Year(s) : 2000, 2001, 2002, 2004 Location : MIDDLE EAST

Price : On request

More details  
4

1 LEZZENI TYPE BRC TWISTING ASSEMBLER (UNDATE MACHINE N° 30061) RECEIPT 300mm BOTTLE SPOOL – 136X16.7 RING +... Location : EUROPE (Western and Northern)

Price : On request

More details  

You can find used Twisting / Two For One (TFO) on Wotol

The main manufacturers of Twisting / Two For One (TFO) are Volkmann, Savio, Saurer, Icbt, Murata, R.p.r., Ratti, Hamel, Lezzeni, Allma, Muratec, Rieter, Ssm, Verdol.
The main models of VTS, Geminis, TDS, 307, 363, 310 TC, WT1E., DT360
 
HS code 8445 - Machines for preparing textile fibres; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft-winding) machines and machines for preparing textile yarns for use on the machines of heading 84.46 or 84.47. 
HS code can be 8445 30 00 - Textile doubling or twisting machines - Electrically operated.

FAQ - Questions and answers from members

Q: I am interested in a ICBT DTAR 360 and I want to use 3 yarn in TFO to twist in ring twister, possible?
A: This machine is working in same time both TFO and ring Twister together , this machine designed to use each from 2 yarns up to 6 yarns for 1 spindle ring twister together.

Q: Please explain the process of a Barmag DD2000 GT Two for one twister
A :DD2000GT is a double twist twisting machine: two thread twists are generated just with one spindle turn. The twisted material is wound onto a cardboard mandrel using a winding system controlled by the bobbin tension and generating precision crossed bobbins. This model of twisting machine is fully parameterizable: twist direction, number of twists, collection speed, cross ratio, etc.
The machine has a modular structure in sections, with four workstations on each side. Each of the main components (spindle, feeder, winder, etc.) are equipped with their own converters.
The control of each one of the workstations is carried out in a decentralized way through a drive in the workstation. The necessary data, such as spindle revolutions, turns per meter, etc., is centrally registered from the unit drive located in the general distribution board. This data will be the nominal value, for the control of each workstation.
The necessary input data for operation can be collected in formulas that can be saved with a specific number and retrieved at any time. Such data is protected against unauthorized changes.
In this case we have two twisting lines for the generation of 250 mm wide bobbins and a weight of approximately 5 kg.

Q: I have seen a RPR GC120N two for one twister 90 positons. It it suitable bro PES, PP and PR 40 dtex to 200 dtex? How many kg per month of yarn can they produce?
A : Yes these RPR GC120N two for one twister can twist PES, PP and PR.
On these machines we are producing from 33 dtex to 280 dtex at a range of 60 to 2500 twists.
For production it depends on the count of yarn and the numebr of twists. For example we for 100 dtex, 600 twists we were producing more than 10 kg per position per monty (1 ton per machine of 90 position). In case of 280 dtex ith 300 twist we were producing more than 20 kg per position per monty.

Q: I am intersted in a used Memmingen SRZ II 300/250 Ring twister and I need toknow if the main motor have an inverter command.
A : This Memmingen SRZ II 300/250 Ring twister was lelivered in 1990. It has two motors, for each machine side one motor which means each side works independently. In 1990 the machine was supplied without inverter but you can install one if you want. 

Q: We are looking for some used twisting machines for fine titers in the range 470 + 550 dtex polyester and polyamide at low budget. What can you recommend?
A: You can produce with used Barmag DD13 or DD23 that can setup current thread title 500 dtex up to 3300 dtex

Q: What is the benefit of a Savio TFO duo pot? I would like to know what is production of 8 spindles on 8/2 ne cotton. This twister put a cone over cone. On top Do not need doublig?
A: Production of Ne 8/2 (Nm13,6/2) with 150 twist per meter will be 96-100 kg/24h on 8 spindles. It is calculated with spindle speed of 8500twist/min, but machine can work with speed of 11000twist/mim and capacity is much greater then. Machine can work as duo pot (one on other cone) with no need of doubling yarn. Machine can work with doubled yarn as well.

Q:  Re your used Lezzeni BRD Assembly twister 1995, can I have details of spindle speed and capstan speed?
A:  This used Lezzeni BRD is very special. It produces fishnet yarn processin at  processing 4.500 rpm. It  is gear drive.

Q:  What are the dimensions of a used T2T R99 TWISTING MACHINE SIMA from 1989 and please explain more in details what it can produce?
A:  The  Sima T2T R99 suitable for producing twisted yarn from 10000 to 100000 deniers in natural or synthetic fiber, with spindle - multiple type for producing tubular tubes.
The spool dimension is 8/9 kg on a tube of 300 mm. Weight of the machine 2100 kg. Dimensions:  cm 230x110x120

Q: Can I use the take up package with a used RPR TFO two for one twister model GC96DF 120 postions, with heater 
A: If you need to put bobins on the take up package, you will need a RPR-GC72 Two for one twister.

Q: Please give me more detaisl about your Yarn twister Custom made with 8 Savio spindles
A: It was made locally. Only spindles are from Savio.
Number of twist lower than 400 is possible of course as well higher number of twists per meter. It can be set with frequency regulator for spindle speed (8 spindles = 8 motors), and winding can be set by gears.
Machine is very economical in electric consumption because it rans as much motors as you use spindles. For example, if you use one spindle at the moment, only one small motor will work to drive the spindle.
Compact yarn twisting machine. It have 8 Savio TFO spindles. Can work as duo pot. Very rare machine. Ideal for small and family knitting and waving productions. Machine can process yarn of different count and type. Unique, hand made. It is in production right now. It have waxing device to.
Production of Ne 8/2 (Nm13,6/2) with 150 twist per meter will be 96-100 kg/24h on 8 spindles. It is calculated with spindle speed of 8500twist/min, but machine can work with speed of 11000twist/mim and capacity is much greater then. Machine can work as duo pot (one on other cone) with no need of doubling yarn. Machine can work with doubled yarn as well.
Dimensions of the machine are: 3.3m x 1m x 1.8m.


Q: We are interetsed in your used Muratec 368 Two For One Twister‎ 1995. What is the power supply of the machines,what type of tube that fits into the basket (we feed with 8-inch cylindrical tube)?
A: The Power supply of our Murata 368  is set up for 380 V., 50/60 Hz. (it has an inverter, so frequency is no problem).  Feed is by cylindrical tubes, 42 mm inside diameter, 20 cm. in length. Pot diameter is 20 cm. If we still have some tubes, we will include them.  It requires compressed air for the yarn to be threaded down the twisting hole. Take up is 5 56’ cones, 6 inches length.  It has waxing device.

Q: What are the dimensions of the element of a used Oerlikon, Volkmann VTS05-0-C Carpet Cabler from 2007 with 104 spindles?
A: Volkmann VTS05-0-C with 104 spindles is composed of 13 elements of cm 200 x 150 x 270 (h) Some parts can be dismantled to reduce heigh for transport + 1 element cm 200x145x200

Q: What is the difference between a cabling machine and a twisting machine?
A: Two for one twisting and yarn cabling are both mechanical impovement of the yarn characteristics. Once cabling done there will be a perfect formation of the hair in case of carpet weaving? In dircet cabling two yarns are twisted one around the other in one operation. This will inmrove the alignement and the cohesion of the fibers.

Q:  Regarding your used Lezzeni TBR / LA yarn twisting 1990 how many bobbins and cops are available exactly? How many spindles are in working condition and how many spindles are missing ? How many pulleys are available and in what sizes ? Can you also explain the technical terms?A:
A: Bobbins are the reels on which yarn is loaded and put on top row of the used Lezzeni TBR / LA yarn twisting . If the machine has 80 spindles, that means 240 bobbins must be loaded on top row. And another 240 must be available for loading and unloading at the same time. That means minimum 480 bobbins must be present.  Cops are the reels that are on spindles and twisted twine is loaded on them. Same logic as above minimum 160 cops must be present. Pulleys and the sprocket wheels of different diameters are needed for adjusting TPM values.

Create an alert