Menu

Used Warper (Sectional)

174 results
26

Benninger creel with 560 positions Automatic breaking system Speed 600-800 m/min With cold sizing Very nice... Year(s) : 2007 Location : EUROPE (Central and Eastern)

Price : On request

More details  
1

RABATEX HIGH SPEED SECTIONAL WARPING MACHINE -MODEL RI-107 S with SEPARATE BEAMER EXTRA REINFORCED METTALIC D... Year(s) : 2017 Location : EUROPE (Western and Northern)

Price : On request

More details  
4

Extra reinforced sectional warper for monofilaments ww 280cm,.beam Ø 1000 mm with Hacoba swiffeling creel, 624... Year(s) : 1998 Location : EUROPE (Western and Northern)

Price : On request

More details  
11

Width of drum : 2700mm Diameter of the drum : 4000mm Date of production: 09.11.1989 Creel capacit... Year(s) : 1989 Location : Unknown

Price : On request

More details  
3

WIDTH 360 cm WITH AUTOMATIC LEASING WITH CREEL 320 POSITIONS. Year(s) : 2006 Location : EUROPE (Western and Northern)

Price : On request

More details  
2

WITH GIOVANNELLI CREEL 320 POSITIONS + 320 RESERVE VERTICAL REJECTION 24 cm HORIZONTAL REJECTION 32 cm. Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

More details  
2

Devsan brand 2.00 mt working width 640 creel installed and running situation. Year(s) : 2010 Location : MIDDLE EAST

Price : On request

More details  
14

WAXING DEVICE BENNINGER CREEL 320 BOBBINS GAUGE 27 MM STATUS: STOPPED AT MILL FLOOR Year(s) : 1988 Location : EUROPE (Western and Northern)

Price : On request

More details  
5

ratio 1:8 beam flange dia.1000 mm. creel with trolleys 560 positions gauge 270x270 mm., waxer. Machine perfe... Year(s) : 1998 Location : EUROPE (Western and Northern)

Price : On request

More details  
14

Sectional Warper model NC350 With 2 creels of 600 ends each, pitch 280 mm 2 sets of trolleys Year(s) : 2003 Location : EUROPE (Western and Northern)

Price : On request

More details  
19

SUCKER MULLER HACOBA Sectional warper Mod. KSE-R (USK-T PC) conicity 1:5, cone lenght 152 cm beaming unit with... Year(s) : 1996 Location : EUROPE (Western and Northern)

Price : On request

More details  
7

1 Tx AIANA Sect. Warper mod.104 yoc 1989 about, width 3400 mm. 1 x BENNINGER Creel, 880 positions, gauge 240 x... Year(s) : 1989 Location : EUROPE (Western and Northern)

Price : On request

More details  
5

Never installed, brand new Year(s) : 2020 Location : -

Price : On request

More details  
7

creel 608 positions, gauge 270 mm. removable trolleys. Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

More details  
4

376 positions creel Year(s) : 1994 Location : AMERICA North (USA-Canada-Mexico)

Price : On request

More details  
22

BEAM DIA: 1000 MM CREEL 960 POSTIONS Year(s) : 1998 Location : -

Price : On request

More details  
2

1 x Karl Mayer ROB sectional warper, 2002 Working width 220cm With Omicron SYSDRIVE Inverter 400 V Karl Mayer... Year(s) : 2002 Location : ASIA (South East)

Price : On request

More details  
3

1 x Karl Mayer ROB sectional warper, 1999 Working width 220cm With Omicron SYSDRIVE Inverter 400V Karl Mayer t... Year(s) : 1999 Location : ASIA (South East)

Price : On request

More details  
6

warping drum as new nominal width 3.400 mm cone 1:5 = > 11° leading roll 700, tape tension regulation max. war... Year(s) : 1989 Location : EUROPE (Western and Northern)

Price : On request

More details  
5

Width 240cm/250cm with creel Benninger 320 cone position. Year(s) : 2000 Location : EUROPE (Western and Northern)

Price : On request

More details  
7

With Rostoni creel Year(s) : 1997 Location : EUROPE (Western and Northern)

Price : On request

More details  
7

with creel Year(s) : 1995 Location : EUROPE (Western and Northern)

Price : On request

More details  
16

Sectional warper Ergotronic of year 2001 with reed and beaming unit. Benninger Creel 640 positions, pitch 24... Year(s) : 1995, 2001 Location : EUROPE (Western and Northern)

Price : On request

More details  
7

width 1800 mm. 1 x Creel 720 positions, gauge 210 x 210 mm. Year(s) : 2006 Location : EUROPE (Western and Northern)

Price : On request

More details  
7

Sectional Warping Max Width: 2200mm Max Flange Dia: 1000mm Leasing unit VTA, including lease reed Creel Hac... Year(s) : 1989 Location : ASIA (South East)

Price : On request

More details  

You can find used Warper (Sectional) on Wotol

The main manufacturers of Warper (Sectional) are Benninger, Karl mayer, Hacoba, Comat, Gamatex, Suzuki, Taiana, Comsa, Giovanelli, Bromas, Sucker muller, Atelier belmont, Comelato, Hattersley.
The main models of Warper (Sectional) are Benvac, Bentronic, Versomat, Benmatic, Supertronic, Ergotronic, Nov-O-Matic, Econ-O-Matic, Band-O-Matic, Economatic, Robomatic, USK series, SFS, 7B, SW-K, USK, Compactronic.
 
HS Code: 8445 90 00 Machines for preparing textile fibres; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft-winding) machines and machines for preparing textile yarns for use on the machines of heading 84.46 or 84.47. 

Used sectional warper in Wotol

Sectional warpers are used to prepare the beams for the weaving.

It is composed of a creel holding bobbins of yarn, a drum on which the yarn will be rolled and finally a beaming section to unroll the drum on the finbal weving beam.

This creel if holding few hundreds to more than 1000 bobbines of yarn.

All the yarns will be pulled from the creel to the drum.

If there are 700 bobbins on the creel they will be rolled buy group of 700.

Once the wanted lenght of warp is reached the drum will stop and and other line of 700 yarns will be rolled next to the previous one and so on.

If you want a beam with 7000 yarns you will need to repeat this action 10 times.

Once you the number of desired yarns on the width of the drum has been reached, the drum will stop.

Q: What tension is usually necessary on a section warper?
A: For warping beams used in non technical fabric the wrapers have a tentions with a range of 0,2 to 10 KN but if you need to warp beams for technical fabric you will need 15KN or even 20KN is some cases. For such tension you need reinforced sectional warper.
 

 

Create an alert